Discussion Locked

PCI slot failure after hard drive format

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i have reformated my hard drive, delting the original partition and reinstaled a new partition and windows 2000. Now windows doesn't detect any hardware pluged into my PCI slots. Am i missing a driver or can you turn these slots on or off? Please help, can't connect my modem to get online.

6 replies

by rabbit_runner

Your problem could be either or both of what you suggest. On the newer motherboards there is a place where you can manually setup and configure the PCI slots on your system. For most users, the default setting or AUTO setting will be sufficient. If your mobo is already set with these, then the next place would be to check for a driver.
From your question, I am assuming that the computer had a previous OS installed. If that is correct, and you have just installed 2000, then the likely suspect would be a PCI bridge adapter driver missing or incorrect. First thing, check on Microsoft's web site to make certain that your hardward is meeting the qualifications. During the installation, there is a place where it will give you a web location to have this checked. I think it is also on the install CD.

What type of error are you receiving? Your question indicated that you installed 2000. That would assume that went okay, but upon a re-boot, something does not work. Can you give us more information?

by rabbit_runner

From the comment you added to your question, the best action would be....
1. Boot your computer and get to the desktop.
2. Run your Motherboard CD and install all of your motherboard Chip drivers. This should include the particular driver you are missing.

To check before attempting to install the drivers, do this....
Right click on 'My Computer'
Select 'Manage'
When the window opens up, find 'Device Manager in the Left Hand Window.
Then in the Right window you should find a list of devices on your computer. Probably you will find some things with Yellow Exclaimation marks or Red X's. If this is the case, then the OS could not find the required driver for that device. Those drivers should be on the mobo CD.

Once those drivers are installed, you should then have the functionality of all the PCI devices.

Best of Luck.

by cadadept

good advice but unfortunatly already tried these. going to attempt to try pctech answer. if you think of anything else please let me know
thanx cadadept

by cadadept

Previous OS was Win98 (fat 32). Instaled Win2000 (ntfs). Not recievng any errors. Purchsed new modem specific for Win2000 but Win does not detect ANY devices plugged into PCI slots incldng sound card. Instaled modem driver but no resources show up and no rspnse upon query. PCI bridge adapter driver mentioned. Is that found on mainboard CD or on Win 2000 CD or other.

by pctech

Bugs Bunny offerd some good suggestions and may solve your problem. Should it not have, you can also try these:

1. Make sure you have the current BIOS version for the motherboard. If not, flash the BIOS.
2. Check the CMOS settings, as suggested, and also check if it is using the PIC or APIC. PIC is what you need for Win9X, but APIC is needed for the NT kernel.
3. Install the latest drivers for the motherboard from the manufacturer's website.
4. Should these suggestions not help, perhaps it is a hardware conflict. Remove all of the PCI devices and bring them in one at a time to see if you can pinpoint which device(s) it is.

I hope this helps

by cadadept

for PCTECH
how do i check if i have the current BIOS version. flash the BIOS? - mean enter BIOS setup? have tried loading BIOS defaults as well as setup defaults in the bios with no success. this APIC - PIC setting may be key, but i don't see any reference to either in the BIOS. where would i find it. i believe this is important because i recently changed the hard drive in my other computer (old one crapped out) but reloaded win98 and have had no problems with PCI slots. if you could clarify and expand upon this i would appreciate it
thanx CADADEPT

This discussion is closed to new replies.