6 replies
by cg it
humm so what your saying is that the Checkpoint is the perimeter firewall that acts as proxy between the internet and the network. Your PIX acts as the internal firewall between the DMZ and the network.
You want to know if the placement is correct?
by xiaitmb
by xiaitmb
by mshavrov
How many interfaces do you have on your PIX firewall, and on your CheckPoint firewall? If you have enough interfaces on PIX firewall, I would recommend to use it as a "primary" firewall. You may use additional firewall if you are short on interfaces (for example, need more DMZs than you have). In this case you may connect them in parallel, and use PIX firewall for users traffic and VPNs, and use CheckPoint firewall as a DMZ firewall. You can also use CheckPoint firewall as a "screening device" or "IDS (intrusion detection system).
Good luck,
Mike
Cisco CCNP, CCDP, CCSP, Cisco Voice
Checkpoint CCSP
CompTIA Security+
etc...
http://www.headsetadapter.com
by xiaitmb
by xiaitmb
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending