Networks

Ask something
Question Locked

Please help me

0 helpful
4 replies

by junkdomain

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi shail here
Very difficult problem I have here, I have two Domain Controllers on two different locations, means each location has one Domain Controller location A have sysportdc1.sysport.com and location B have cambayserver.sapphire.com domain. Both domains are independence to each other.

Details of sysportdc1.sysport.com
Network 192.168.0.0
Mask 255.255.255.0
ADS, DNS and DHCP services running on this
NAT Protocols configured on other one server
Cisco 2800 series router for radio link connectivity

Details of cambayserver.sapphire.com
Network 192.168.1.0
Mask 255.255.255.0
ADS, DNS services running on this server
NAT Protocols configured on other one server

Both locations connected through Radio Link to third party provider

I have add persistence route on both NAT server (i.e. C:\route ADD MASK -p) so I can ping with IP address from one location to other location.

Now I want to create trust relation between location A and location B. so what should I do.
Please explain in detail and help me please

4 replies

by p.j.hutchison

You will need Enterprise admin rights on bother domains.
Use AD Domains and Trusts console, open properties of the domain under AD D&T and click on the Trusts tab, then add the other domain on one or both panes (depending on how the trust is set up).

by junkdomain

thanks for reply
but befor that i need to do DNS setting on both end right? what is it? that i dont know.
b'coz without DNS i couldn't find other server

This discussion is closed to new replies.