Discussion Locked

'Please wait while system shuts down'

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is an old issue that I've never been able to solve:

In several Win95 PCs I receive the typical message 'Please wait while system shuts down', but the system never turns off by itself.

I'm sure the system isn't hanged up because the CapsLock and NumLock LEDs keys work properly.

If I turn the PC power switch off and then turn it on again, then it detects the system wasn't turnoed off properly, and then enters in the Scandisk mode.

How THE HELL can I fix this?

9 replies

by oz_media

Sounds like the power management settings in the BIOS. You will probably see something completely obvious if you look.
Om

by pctech

The shut down patch was Win98 specific as was the mapped drives shut down patch. I more suspect a driver or the Windows Exit sound file is hanging on shutdowns and Win95 does not have MSCONFIG to allow you to easily determine this. Does it shut downproperly in Safe Mode? If it does, look for offending drivers that load in under Normal Mode, at least as normal as Win95 gets. Try disabling all items in the Startup group and see if this resolves your problem. If so, bring them in one at a time until you find the offending application. If not, try disabling device drivers, one at a time, until you discover the offending driver.

Furhter information on which version of Win95 you are running may also offer some clues for us.

by pctech

Fizzoid, answer #5, makes a valid point, if the circumstance exists. This is certainly worth making a note of for future reference.

by deadly ernest

I think the key parts here are 'old issue' and 'Win 95'. The shutdown process sends a software signal to the motherboard to turn off the power supply, many of the older machines do not have this capability in the motherboard or the power supply.If the power switch on the front of the pc case goes directly to the power supply the shutdown process will never turn off the power supply as it has no connectivity to do so.

If the motherboard BIOS does not have the right level of power management then it wont shut it off either.

As a general rule AT boxes require physical turn off of the switch and most ATX boxes have the power management. Please note GENERAL not guarranteed.

by fizzoid

Do you have Norton Anti Virus installed on them? If so, go into NAV and make sure the PC's are NOT set to scan network drives. I've noticed that causes shutdown problems on 95 & 98 machines.

by ananthap

I've noticed this in W98 also. It seems to be related to some bad operations (by the end user). In my experience, I was able to narrow it down to users "cancelling" a particular program that connected them via a dedicated serial communication channel and custom program with another PC. (some sort of deadlock I suppose).

Till I was able to educate the users, I had to C-A-D the system and EndTask the bad program.

Maybe this is what is happening in you case.

End

This discussion is closed to new replies.