Discussion Locked

PnP in Windows 2000

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Windows 2000 on my machine is assigning IRQ11 to 6 devices, whilst other IRQs on the machine aren't being used. Unfortunately, most of the devices on this IRQ are 'bus hungry' and I need to move one particular card to its own IRQ. Do I have to disable ACPI to do this or is there anyway/utilities to do allow me to configure the IRQs manually?

Thanks.

2 replies

by igor948

If you choose the "Properties" of a device in the device manager,ther is usually a "resources" tab available. Choose this tab and uncheck the "Use automatic stting box." Then click on the "Change Setting" button. This should allow you to make thenecessary changes. NOTE: YOU MUST HAVE ADMINISTRATIVE RIGHTS ON THE PC TO MAKE THESE CHANGES.

by igor948

If you choose the "Properties" of a device in the device manager,ther is usually a "resources" tab available. Choose this tab and uncheck the "Use automatic stting box." Then click on the "Change Setting" button. This should allow you to make thenecessary changes. NOTE: YOU MUST HAVE ADMINISTRATIVE RIGHTS ON THE PC TO MAKE THESE CHANGES.

You may also try forcing the IRQs in the BIOS.

This discussion is closed to new replies.