7 replies
by leeswen Accepted solution
by bhatnagar_nitin9 Accepted solution
by pchatelle Accepted solution
The title sound obvious right? Well let me be more specific; the printer you are using locally needs to have drivers installed on the terminal server that you are using. If only it were that simple, the drivers need to specifically be of the Mini-Driver type, when installed on the Server and the Client everything thing works without any effort. Meaning your local printer will be automatically added and remove from your printer terminal server selections when you connect and disconnect. If you can't find the mini-drivers, get a different printer, seriously it will save you time (and time is money). The dell 1700 laser printer (i think lexmark makes it)is a $199 printer, has mini-drivers, but I am sure there are many others. Oh and I am using XP Pro SP2 as a client.
Hope this helps.
by dontknowwhatimdoing Accepted solution
on the host computer. If you use Remote Desktop Connection, and I'm assuming you do, click on the Options Button then the Local Resources tab and make sure the Printers checkbox is checked. Remember, though the printer driver must be on the host computer as well.
Hope this helps.
by cameront Accepted solution
I have a situation where I have 3 remote desktops being used as POS being accessed from different sites. There are 3 things I have found while setting up the remote sites for printer porting for RDP.
1. With HP (2420) printers sometimes the driver is not campatable with the hardware and as such RDP will not forward the driver. If I used the next driver (2410) below the printers model number the printer would then be ported to the remote. Install the driver on the Remote PC and then install on client PC. Restart.
2. Some drivers (docket printer) do not support porting the printer to RDP so I was able to use Generic Text driver to over come this.
3. If your printer is connected by USB then RDP will not forward the port. To overcome this
1. Click Start, click Run, type regedit, and then click OK.
2. Locate and then click the following key in the registry:
HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default\AddIns\RDPDR
3. On the Edit menu, point to New, and then click DWORD Value.
4. Type FilterQueueType, and then press ENTER.
5. On the Edit menu, click Modify.
6. Type FFFFFFFF, and then click OK.
This enables all ports on the client to be redirected.
To work around this problem on a client computer that has a multifunction print device, change the port that the multifunction print device uses from DOT4 to an LPT port.
For example, to configure a multifunction print device to use an LPT port on a Windows XP-based computer, follow these steps: 1. InControl Panel, openPrinters and Faxes.
2. Right-click the local printer that is not redirected, and then click Properties.
3. Click the Ports tab, click an LPT port, and then click Apply.
The printer should now appear next to that port.
4. Close the Printer Properties window, and then reconnect by using Remote Desktop.
Important When a multifunction printer is using a standard LPT port instead of the DOT4 port, it loses its multifunction capabilities, such as scanning, faxing, or copying. To regain the multifunction capabilities, the print device must use the DOT4 port.
I have had to use all but the last fix to get my printers working with RDP.
"Here's the rule for bargains: "Do other men, for they would do you."
That's the true business precept." Charles Dickens (1812-70)
by roninv Accepted solution
by cricure Accepted solution
The most easy way is to purchase a commercial solution,
the cheaper one is TSPrint which works great http://www.terminalworks.com
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending