13 replies
by canadian_guy Accepted solution
by curlergirl Accepted solution
the correct drivers installed on the server. You don't actually have to have a printer of that type installed on the server, as long as the drivers are installed. If it's not a common printer that has drivers already present in the Win2K OS, What I usually do is install a "local" printer and then delete it, so that the drivers remain installed but there isn't any non-existent printer showing up in the Printers window.
Hope this helps!
by martin.tully Accepted solution
by working it Accepted solution
I am using the Terminal Server Printer Driver Redirection Wizard. You can find that at the end of the http://support.microsoft.com/?id=239088 page.
I asked the user to login to the Terminal Server. Then I will run the Wizard to install the print driver on the server. Next time the user login. The printer will be ready for use.
Note: I am having problem with the HP OfficeJet (multi-function) printer. Brother MFC printers are working fine. And also, W2K Terminal Server doesn't support network printer on the client PC.
by kielax Accepted solution
by curlergirl Accepted solution
Printers that use a non-standard port, including USB and network printers, can be mapped. However, you have to do a regedit on the client machine to allow this. Here's an MSKB article that addresses the non-standard ports and also the problem with multifunction devices.
http://support.microsoft.com/kb/302361/en-us
In my experience, performing the regedit solves any problems with both network and USB printers. I haven't tried the solution for the multi-function printer situation.
Hope this helps!
by canadian_guy Accepted solution
I should have guessed setting up an HP All-in-One would be more tricky, because that is exactly what I need to do. I will refer to all of your suggestions as I work through my dillema.
I appreciate everyones input.
by shidav Accepted solution
I had the same problem with HP AIO LaserJet 3380 printer, which "refuse" to redirect via connecting XP pro station (using RDP) to a Terminal Server 2003. Following the http://support.microsoft.com/kb/302361/en-us instructions solved it and everything works smoothly.
Many Tnx curlergirl
by tod.b Accepted solution
So I'm using a Windows 2000 Pro workstation. With a Brother MFC connected to the lan via the machine's ethernet port. I do most of my work on a XP Pro machine which I remote to. I'm trying to make the XP Pro machine view my local printer here. I have the drivers installed on the remote machine, and am having no luck at all. The printer does not show up on the remote machine. Can anyone help?
Thanks.
by smiththo2001 Accepted solution
To get the OfficeJet All-in-One to work in Terminal Services you have to use a substitute driver. The OfficeJet drivers are not compatible with Server 2003.
Here is the link to the document:
http://h71028.www7.hp.com/ERC/downloads/4AA0-8465ENW.pdf?jumpid=reg_R1002_USEN
It's titled "HP Printers supported in Citrix" but it applies to TS as well.
by shasca Accepted solution
Down the page on this link is a printer wizard designed for terminal server printing. Try it out and let us know the results
by shasca Accepted solution
by cricure Accepted solution
Use can use pdf converter, and copy pdf to local machine.
There is low cost software to do this
terminalworks.com software is named TSPrint
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending