I recently bought the adapter kit and attempted to install and access data on a IDE hard drive from an other computer.I connected the adapter to the hard drive and power to the adapter. I then connected the USB cable to the computer. The computer (XP Prof) recognizes the USB device as “E” but when I attempt to access it I get a message: “Drive Not Formatted”. I am able to successfully run Seagate diagnostics on the drive so I assume the drive is ok. I queried Windows Disk Mangement (in Computer Management. It shows both drives (C and E) as Healthy and shows an Unknown Partiton (3.7 GB). This partition appears as part of the System (C) drive and also as a seperate paertition with no volume designation. Any help would be appreciated.