Discussion Locked

RAID addition

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a hardware RAID configuration and have three 18 GB hdds configured with data on them. I am wanting to add more storage and add about 3 more 36 GB HDDs in a RAID configuration also. Will I have to initialize my current RAID and lose everything before I can add these other drives? What are my options here?

4 replies

by timwalsh

Since you can't add the 36 GB drives to your current array (without losing half your drive capacity), you really have two (maybe three) choices:
1. If you have a dual channel RAID controller, create a second array with the new drives and move your data to the new array.
2. Backup your data to tape; rebuild the array using the new drives; restore from tape.
3. If you happen to have a spare drive large enough to temporarily hold all your data, move the data to the temp drive; rebuild the array using the new drives; move data back to the array.

This discussion is closed to new replies.