Discussion Locked

RAM problem

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have 256 MB RAM in my system. I have dual os ie. win 98 and win 2000. The problem is that it shows 128 MB RAM in win 98 as well as win 2000. During booting, only 128 MB is shown. Why doesn't it display 256 MB RAM?

Regds,

Ajit

2 replies

by dmiles

First check the motherboard manual to see if it supports the memory upgrade,if so boot computer,at startup page press the designated key to enter Bios setup congiguration locate memory configuration,right-click and this should show the memory value that can be set on the boardselct the 256 if available,save and exit

by thechas

If this is an older PC, the motherboard could be limited to 128MB per DIMM.

Or, the motherboard cannot deal with the structure of the SDRAM module that you have.

Many older motherboards need specific DIMMs, or they cannot recognize the full capacity of the DIMM.

There are at least 4 iterations of the SDRAM DIMM specification, and they do not require full backwards compatibility for new DIMM designs.

Chas

This discussion is closed to new replies.