Discussion Locked

reformatted hard drive ntfs,

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I accidentally formatted my hard drive NTFS, can it be undone? Now it obivously won't even boot, and it doesn't even recoginize the floppy.
Any suggestions.

Thanks

14 replies

by dmiles

Using a Windows 98 startup disk boot computer,at command prompt type fdisk

Under the options given choose to delete the non-dos partitions first,if you have any other partitions such as extended or logical partitions delete them now delete the primary dos partitions to wipe the drive then reboot and follow the screen to partition and format the drive.

by craigjv

I can't even get the windows 98 boot disk to boot up. Maybe I have a hardware issue?

Thanks for responding to my question.

by maelgwyn

now, to get NTFS, you would have had to have
2k/XP/NT to install it, right? Now to undo it,
redo the install process and make the
partition into a FAT partition. That is probably
the easiest, since the oter is to use the
bootable CD and hope you can get dumped
into the dos prompt. If the disk (boot one) don
work, but works in another box, check the drive
and the cable. Sometimes, all it is is a 2 buck
cable fault. if the disk doesnt work, there may
be the culprit.

Anywho, I gtg

I hope it helps and I apologise for the typos.
Mac keyboards are not friendly to me...

Please, drop me an email if you need more
help.

Maelgwyn

by zlitocook

You did not say what kind of computer it is? But down load delpart, MS has it and alot of other sits. It was put out by MS because so many people had problems removing NTFS partitions. If your computer will not boot to a floppy check your bios. Mostcomputers as they boot up will tell you how to get into it, F1, ESC, F10 or del., If it goes by to quick try booting up and place your hand on alot of keys at once. It should give an error and let you into the bios. From there find the boot order and put floppy first. And reboot with the boot floppy in.

by tduval

Boot DOS, run fdisk, supresse partition unknown.
Now, you're free to format in any type.

Even W98 boot cd should let you fdisk.

by clearsmashdrop

Did a boot disk work previous to this change?

NTFS on the hard drive does not impact booting with a floppy drive.

Try checking your BIOS to make sure the the boot order seeks the A: drive first.

If it is, then try a different floppy. Was the floppy drive working okay before?

by c.mcfadden

the easiest way to change your hard drive from NTFS/FAT32/FAT and so on is to make a set of boot bisk with Partitation Magic you can do all the set-up of your drive.It take 2 disks and only takes seconds for create/format/partitation hard drives. good luck

This discussion is closed to new replies.