Discussion Locked

replace mouse.drv

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I did a new install of XP Pro and everything went find but one program the client has asks for you to replace mouse.drv.
I deleted the mouse and reinstalled it, used a USB instead of PS2 mouse and the same thing.
This is a brand new P4 box
ANy ideas?
I am stumped!

7 replies

by dmiles

To install the USB driver, simply:

All your input devices must be working under Windows (i.e. the old version of the USB driver must not be running, the device should not be disabled etc.)
You must be Administrator.
Select "System" from the control panel. If "System" is not visible, click "Select classic view" at the left of the window.
Select the "Hardware" tab.
Click "Device Manager".
Expand the "Mice and other pointing devices"-tree.
Double-click on the desired input device.
Select the "Driver" tab.
Click "Update Driver".
Make sure "Install from a list or specific location" is checked.
Click "Next"
Make sure "Don't search. I will choose the driver to install" is checked.
Click "Next".
Click "Have Disk".Select the correct location (This is typically C:\Program Files\CPN Tools\Mouse driver).
Click "Ok".
Select the correct "CPN Tools mouse filter driver" (For USB and serial devices the correct is auto-detected, for PS/2 devices, all of USB, Serial and PS/2 are available; select PS/2 in this case).
Click "Next".
Click "Yes".
Click "Continue Anyway".
Click "Finish

by pchlp

I copied the driver from an another PC to a disk and then booted up into does. Renamed the old mouse.drv and copied over the new one and all was well.
Thanks for your inputs

by pchlp

I cannot find this folder C:\Program Files\CPN Tools\Mouse driver

Also, I have tried both USB and PS2 mouse and same error.
Would this be on the XP Pro CD somewhere.

by thechas

Sounds like a legacy issue to me.

Check with the program manufacture for an XP update or version.

Many programs and hardware devices do NOT function correctly under XP.

Did you install the XP critical and compatibility updates?
This can also correct problems with software.

You may need to manually extract the mouse.drv file from the software installer, and run the program in compatibility mode using their mouse driver.

Chas

by pchlp

I copied the driver from an another PC to a disk and then booted up into does. Renamed the old mouse.drv and copied over the new one and all was well.
Thanks for your inputs

by pchlp

Actually, it says to install it in the "system32" directory.
I have put on SP 1 and tried useing the Compatibilty mode but same thing.
The software is Abak 6.0.4.4 It is for employee time reports.
It went another XP PRo PC no problem.
I have emailed the software company but no answer yet.

This discussion is closed to new replies.