3 replies
by r_carrison Accepted solution
by Former member Accepted solution
You will have to a restore on to a hdd and then copy this over to the Raid0 drives. Then go into the bios and select the Raid drive in question and see if it boots up.
A bit of a pain but that is what i used to do.
Until i got bigger drives, now i do not use this Raid utility unless it is Raid5, then i will use it. With a Raid5 set up your data is saved across many drives and you can swap out any drives (up to two) and not loose data.
Hope all goes well.
Please post back if you have any more problems or questions.
If this information is useful, please mark as helpful. Thanks.
by r_carrison Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending