Windows Forum

Ask something
Discussion Locked

RRAS with disappearing local interfaces

0 helpful
5 replies

by tictag 2 views

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

RRAS issue with disappearing local interfaces

Hello,

At a currently unknown trigger, the local LAN interfaces within RRAS just disappear. I am left with only dial-up, loopback and internal interfaces. NAT fails and my LAN clients are left without Internet access.

ALSO at the same time I get a Userenv 1000 event (windows cannot access registry information?.. [1351]) every DC GP refresh (5 minutes) and a ?Error 0 to send control flag 1 over to server? entry in the Winlogon log.

ALSO at the same time I cannot read any group policy using the GP snap-in

TROUBLESHOOTING
- Restarting RRAS has no effect
- Restarting Server service (+Netlogon etc) has no effect
- Microsoft KB doesn?t seem to have anything that ties in all symptoms
- The only fixes I have found are to:
a. Reboot server
b. Remove / reconfigure RRAS

Has anybody experienced this before?

Regards,
Tictag.

5 replies

by d.walker5

Things to try: 1. Remove the PC from the domain, restart, than readd the PC. 2. Move the NIC that has File and Print Sharing bound to it to the top of the binding order in, network connections > advanced > advanced settings. 3. Be sure your reunningthe lastest SP (SP2 solved this problem see Q258960. Also, see Q117078, Q106167.

by tictag

Thank you for the reply but unfortunatly,

1. This server IS the domain ;-)
2. The Bindings for F&PS are already top
3. I'm running SP4 and have been for some time
Q258960 - Higher SP and only have one IP address per NIC
Q117078 - Could not find article
Q106167 - Not applicable to environment

Tictag

by d.walker5

Sorry,you're still having problems. Try doing a Regestry search for IRPSStack. Reset the value to a higher number (default is 15) range is 11-50.

This discussion is closed to new replies.