Wipe the HDD with a utility like Boot & Nuke
http://www.dban.org/
Or Kill Disc
http://www.killdisk.com/downloadfree.htm
Either of those will completely Kill off Cool & Quite which should never be on a system that gets heavy use.
As for the heating Issue that's not overly Hot but I would be looking at improving the Air Flow through the case. So adding more case Fans and possibly a much better CPU Heat Sink would be my starting point, unless of course the case is so crappy and badly designed that it's impossible to get rid of the Hot Spots. If that's the case here I would just dump the case and use one of the Antec Ones like the Antec 300 it's a great General Purpose case for high end users
http://www.antec.com/Believe_it/product.php?id=MjQ=
Though if you want things to look Glitzy or Looks are important the Skeleton is another very good case but you have to watch the way that you tidy things up. ;)
http://www.antec.com/Believe_it/product.php?id=NzA0
As for CPU Heatsinks I really like the Zalman ones
http://www.zalman.com/ENG/product/CategorySecond_Pic.asp?categoryname=Coolers&categorySecond=
Though Antec has a couple of Decent units as well. The K?HLER Shelf works a treat
http://www.antec.com/Believe_it/product.php?id=MjQxOQ==
As well as the Performance Max CPU Cooler
http://www.antec.com/Believe_it/product.php?id=MjExMQ==
But if you are concerned about the heat you could always go with Water Cooling of the CPU and GPU's.
http://www.zalman.com/ENG/product/Product_Read.asp?idx=185
Or the Corsair one here
http://www.corsair.com/products/h50/default.aspx
Any of those solutions should cure the Heating issue. Also when you get the system reloaded this time forget Cool & Quite it's not worth the problems that it creates you should also create a Image of the Freshly Loaded Base Install with something like Acronis? Backup & Recovery? 10 Advanced Workstation
http://www.acronis.com.au/backup-recovery/advanced-workstation/
That way you can return to the Base Install very quickly and know that things will work. From your description the problem here is with the Software installed not the Hardware being underpowered for your needs, so something is eating CPU Clock Cycles at an alarming rate that is wasting both your Processing Power and Time.
Just installing the wrong bit of Software can do thins and when it's done the only cure is to Wipe and Reload. Because Windows has that nasty Activation Required if you Clone a Image of the HDD you can recover very quickly and if done properly on the same Hardware you don't need to reactivate.
Symantec's Ghost is the other High Usage Cloning Utility
http://buy.norton.com/estore/mf/productDetails/categoryCode/Backup_and_Restore_Sub_Category/productSkuCode/13574836/priceGroupId/Master_Cons_PL/
I personally prefer Acronis but maybe that's just me. If you want a free Cloning Utility Clonezilla works well but lacks some of the bells and whistles that the above 2 have
http://clonezilla.org/download/sourceforge/
Oh and by the way my Video Editing system has 24 GIG of RAM loaded but I don't use a M$ OS as I don't have the extra time to waste, but then again I'm using a App that isn't all that common as it's a High End CG Utility. :^0
Col