Discussion Locked

Shared printer-1 PC can't print to it

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

-Setup: 9 computers/Win98 peer-to-peer using NetBEUI and IPX/SPX protocols. Primary usage is a medical office DOS program running in Windows being used by 6 PC's concurrently.
-I setup a new HP 1100 printer on one workstation to be shared. Everyone can print to this printer consistently except 1 PC. The 4 PC's in this area capture LPT1 to print to this printer. This 1 pc will always print a Windows test page. It almost always has the capture activated correctly on Windows startup. When I first capture the port on it, it prints correctly. The next moment or day it does not. I have confirmed it not printing when the capture is active.
-I moved the printer to this problem PC. It printed fine consistently but the previous direct-to-printer pc could not print to the printer. These 2 computers can share files if required although this is not needed.
-I have reinstalled the network protocols and the NIC on the problem pc to no avail.
-There is an HP LJ IV shared printer in another area that all these computers can always print to and is captured on LPT2.

Help would be much appreciated!
Thank you... Lamar

5 replies

by rucinski

Windows: Identical machines, doing identical tasks, and one behaves differently. :)

When using capture to port, the last page doesn't print until either the page buffer is full, a form feed is issued, or a _windows_ print job is started. Note that the last page can be the first page if there isn't enough text.

Try deleting the printer from Start -> Settings -> Printers, re-boot and re-instal the printer. Try a test print from the DOS box and re-boot to insure that the settings stick.
I've had to do this a few times and have not a clue as to why Win occassionally forgets it's settings.

Bob

by baziite

Since you say you can print the testpage everytime , there seems to be no problem with printing from windows APPs . The problem most probably lies with the DOS printing .To troubleshoot this do the following . On the PC with the printer , delete theprinter then reinstall with the Add local printer wizard and make sure you choose to spool MS DOS printing . On the clients also delete the printers and reinstall using Add Network printer wizard and make sure you choose to use DOS printing . Now onthe PC with the printer display the spooler by clicking on the printer icon and study carefully the jobs arriving and getting printed , if you see a job arrive and then not print , Track the PC it came from , purge it and tell your users to resend it . Do this a couple of times to make sure that the job is arriving and not printing . If you see this then most probably the problem is driver incompatibility , you need to install the same driver on both PCs .

Much Luck !!!!!

This discussion is closed to new replies.