Discussion Locked

Slow Access to network shares

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'am experiencing slowleness in accessing the shared folders on the server and this is only happened when i sit on my PC, from any other pc on the same HUB it's OK.

6 replies

by tduval

Try to plug your NIC into a different wall connector.
Change your drop down cable.
Then, change your NIC.

by walid sabra

Try to login to your PC using another user profile (deferent username & password)
Check then the shares if it's ok. then try to refresh your profile using the registry.

Good Luck

by ctmoore1998

Verify your cabling is to spec test if you have the equipment, next try and set the speed of your connection manually via the NIC's advanced properties in the network places try set to 10 half then bump up to 100 half. If your speed is set to auto then that would explain the slowness as the NIC and HUB negotiate the link speed continous over a bad cable or patch cable. 568b CAT V is 1-8 wht/org, org, wht/grn, blu, wht/blu, grn, wht/brn, brn. holding male connector with the clip latch down pin 1is on left.

by skarimari

What protocols are bound to the NIC? Should be just TCP/IP. IPX or NetBeui can compete with TCP/IP slowing traffic down.

This discussion is closed to new replies.