Discussion Locked

slow logins with Xp Pro and NT Server

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Recently, we installed 15 XP Pro computers on a Win NT Server 4.0 network with 75 NT 4.0 workstations. Now, all the NT workstations have a very slow login. In some cases, 5 minutes. Does anyone have an idea why this is happening???
Thanks

6 replies

by jschein

Those NT machines are probably setup for DHCP...

NT with a variable domain using dhcp takes about 3-7 minutes for initial logon. If you can, change you DHCP span so you have some room and assign the NT machines static i.p.'s. They will boot right up.

by jschein

Another ?... Are you using roaming profiles? If so, just check the user profiles and ensure they are only aroun 4-8 mb... anything more is misc. that the user has put there.

Not sure if I can think of anything else other than is they are on a 10 base t or 100...

by sgt_shultz

doe the XP login slowly as well? is it possible to perform test NT wkst lgin with XP boxes turned off? does login snap back up?

by ctmoore1998

Check the PDC eventlog and look for excessive browser elections if that is taking place. Also you can try putting the PDC info in your LMHOST file WINNT\SYSTEM32\drivers\etc should have an example host file to follow. lmhost.sam try putting the PDC info in following the same
xxx.xxx.xxx.xxx server #PRE #DOM:domain

This discussion is closed to new replies.