Discussion Locked

Slow network connection

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi

I have a problem with my machine communicating with the network i.e. it is s-l-o-w. My machine is a Dell Dimension 2350 running XP (SP1), with 256MB RAM. The network card is a Realtek RTL8139 Family PCI Fast Ethernet NIC and came pre-installed.

Other machines on the network are not experiencing any problems communicating. The most noticeable effect is when Using Pegasus Mail. All mail is downloaded via my machine then pushed onto a server. When I close the New Mail window on my machine it takes approximately 1 second for each message to be transferred. When I perform the same action on another machine (Win98/2000), the process is almost instant regardless of how many messages need to be transferred.

I have looked at the NIC in Device Manager and there are no conflicts reported and the device is working properly.

Each computer connects to the network via a switch and patch panel using CAT5 cabling (recently installed and tested). The network does not have any remote connections.

Any suggestions on how I can troubleshoot this problem?

6 replies

by quintar51

hmm, if you go into Network Connections window, take a look at the Local Area Connection properties for the NIC. How many protocols are you using? TCP/IP is the only one you should be using.

If go into TCP/IP properties, make sure you're using the correct DNS server. If that still doesn't work, try this: go to Start, Run, type ing CMD. Then type IPCONFIG /FLUSHDNS. This will clear the DNS cache in case it's a DNS issue.

by blackcurrant

Hi Qunitar, thanks for answering. TCP/IP is the only protocol installed. The machine is not currently connected to a domain so the DNS server address is not presently required(?), plus I frequently have to run the /flushdns switch to enableviewing of web pages (the internet connection is frequently dropped, and I use this to force I.E. to refresh the page). Thanks anyway.

by jim-h

I really like the DNS Flushing as a step to take. If it is only when pushing your Mail to a different Server you might be having some name issues resolving the destination Server.

Also, I would attack this in an OSI layer approach. It sounds likeyou have isolated the problem to your Mail programming pushing mail to a Server.

Let?s go through the OSI to maybe isolate:
1) Ping your default gateway rather aggressively to see if you are having any local LAN issues. Start>Run>cmd --> ping default.gateway.ip.address ?l 500 ?t

Is this good consistently? We more or less rules out Layer1-2, if your Cable or NIC was in trouble this ?should? show something. Even run it when the problem occurs. If not then you want to investigate your connection to the default gateway. You may also want to try hitting some other devices on your LAN in case there are multiple switches and you are taking a poor path.

2) Well if we rules out the above lets do the SAME test to that Server that you push your mail to. Again, run the above ping but with the Server Address.

Did this look good when the slow-ness occurred? If it did not look good then we ?might? have a Layer1-3 problem somewhere to the destination. Try using ?tracert? in windows to check your path and compare to others not having a problem. Also ask the Server admistrator to do the same thing back to you to check the return path. Compare the times for each hop to the destinations. If you see one jump WAY up investigate.

Continue?

by jim-h

3) Well if we made it this far I would start wondering about Layers4-7. This gets right into the Application that you are using. Can you ?maybe? do the same test using a different mail client? Is it possible that the Server where you push the mail has to deal with LOTS of data from you and slowing you down? Just for grins try doing a totally different test to the destination Server that seems slow. Ask the Server Admin to enable something like FTP and try to upload a few large files, just for testing. Do the same on a PCs that does not have a problem?are the times the same? If not then go back to the above steps. If so, then you probably have an issues with the mail program, server account, etc?

Hope it helps! Good Luck!
Jim

This discussion is closed to new replies.