Discussion Locked

SOHO, Win2k, ICS, and RAS

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi!

I was wondering if anyone successfully has set up Win2k with ICS and RAS?

I am the network admin at a SOHO (Small Office/Home Office) with 2 servers. I have a Win2k server running file sharing and printer services and a NT 4.0 server running Exchange 5.5. I recently changed the network protocal from Netbeui to TCP/IP and am using ICS to share the internet connection to the server (2 LAN Cards...1 for Internet, the other for the LAN). The ICS is also handling the DHCP, DNS, NAT, etc.. Everything works fine on the LAN as I can connect and browse both servers using Win98, Win2k, and WinXP machines.

However, when I dial in using RAS, I can't. Depending on the OS, I get different results. Has anyone successfully set this upor should I actually set up DCHP, DNS, and NAT on the Win2k server and use another method to share the internet connection (eg Proxy Server)?

I believe the problem is with RAS and ICS. Any insight would be helpful.

Thanks in advance for any responses!

Thanks!

Dr. Allenium

3 replies

by cg it

Dial in using dial up telephone connection shouldn't be a problem provided that in RRAS the modem is recognized and a dial in phone # is specified [and that the user account has permission for Dial in access]. Using the internet is the same as a VPN. if you have a static IP address, then creating a new network connection on client computer just requires the IP address. If you use a router then port fowarding to the right server is required.

by curacao_dejavu

Hi,

Here is the link of MS on how to setup ICS.
http://support.microsoft.com/default.aspx?scid=kb;en-us;307311

and another for basic networking.
http://www.pcnineoneone.com/howto/hmnetwk1.html

Also try to setup the gateway and dns entries(of the server) manually in the pc's and see what happens.
If it works you will know that there is a misconfuration somewhere.
Which OS are installed on the clients ?
and what are the results, you have to be a bit more specific if the above tips don't help.

Leopold

This discussion is closed to new replies.