Discussion Locked

Sound

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I replaced MTHR BD with new Soyo w/audio & 1.3 Celeron CPU, 384 MB memory SDRAM(PC133). Used Exisitng HD with Win 98 2nd Ed. All new Device installed OK including Audio. At Control Panel/Sounds/preview WAV sound (Exit Windows or any other)no sound is produced. The play button remains dimmed at all times. I have reduced the graphics accelerator; doesn't have any effect.

I disabled the on board audio (Via) and installed Cmedia 8738. When System Devices is checked the Device Driver reports that the Audio device is operating properly; however, same result as above when Sounds is checked out.

4 replies

by fred07

Hi,
Two things pop into my mind.
If you have the little volume control on task bar, click it open and set it to high and click on the volume control bar and see if it changes color; it should lighten for just a sec.
If it does go white as you click on it then your sound is working and your speakers are not.
I have had this problem with many speakers as the speaker plug is not making proper contact in the receptical. Why is that the industry increased the female end size. My older speakers will only work properly in older systems. I have many speakers that will not work in the newer systems or have a high buzz. Twist the speaker connection to hear static out of speakers.
I also have had speakers die and spent frustrationg hours trying to reinstall drivers and all else only to change speakers and all was fine.
Hope this helps.

by donmars

UNDER CONTROL PANEL|MULTIMEDIA AT THE AUDIO TAB CLICK USE PREFERED DEVICES ONLY BOX, LOWER LEFT. CLICK THE DEVICES TAB EXPAND THE "AUDIO DEVICES" BRANCH HIGHLIGHT THE DEVICE CLICK PROPERTIES ENSURE "USE AUDIO FEATURES ON THIS DEVICE" RADIO BUTTON ISACTIVE. CLICK APPLY AND OK. EXPAND THE MIXER DEVICES BRANCH. HIGHLIGHT THE DEVICE, AND SELECT PROPERTIES. IF YOU ARE USING MIXER FEATURES ON THAT DEVICE THEN CLICK SETTINGS AND MAKE SURE THE AUDIO IS NOT MUTED AND VOLUME IS TURNED UP. I HOPE ITS THIS SIMPLE.

by jwlduke

The problem with the sound has been solved:
While the Windows 'Device' status indicated that the card was working properly, drivers etc., the Driver was nevertheless nonfunctional with the Windows 98 2nd Ed OS. I change sound cards, installed the appropriate driver. Sound works fine.

JWL

This discussion is closed to new replies.