5 replies
by jim-h
You want to setup some sort of transfer between PC-A and PC-B to find your speed. Larger files will give you more accurate results, 1-10M. If you use small files your speed will look much smaller than expected. (As I have learned the hard way)
My personal favorite to test speeds is FTP. You can download a free FTP Server from webattack.com or tucows.com. Next, I prefer to use command line as sometimes different FTP clients vary in operation and simply is better, but you can use any FTP client to start a download from one PC to another and watch the transmit rate or time to calculate. If you are given the data rate in Bytes; multiply by 8 to get your bits speed.
For example:
If I am given 193K Bytes as a rate from a test, then I am getting T-1 speeds. (8*193K = 1.544M)
You also might want to try this little tool that I found online recently. It looks like it might have a client and Server ready for you...I have not tried this one yet so please post your thoughts if you do.
http://www.webattack.com/get/speedtest.shtml
http://www.raccoonworks.com/Downloads.htm
Hope it helps,
Jim
by jeremy
Poster rated this answer.
The connection should vary according to the setting and the capability of both ends. For the network conenction go to Control Pannel >> Network Connections >> Local Area Connection
Select the General tab and the Properties button,
this will open a window where you can configure the connection. At the bottom left corner is a little box labelled 'Show icon in notificationarea when connected' tick this box.
Now when ever the connection is up you will have a little icon like to PCs near showing in the staus bar. When you place your mouse pointer over this icon whilst the connection is open it will show a little box saying 'Local Area Connection Open and give the speed that it is currently operating at. this is the speed of the local area network if you have a gateway it will show the speed between you and the gateway but not between the gateway and the next hop.
by jeremy
Poster rated this answer.
by jeremy
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending