Discussion Locked

time out 8% of the time

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a wan with 9 satellite clinics each having their own T1 connection to a main site. Each server has nt4.0 with the exception on the one I am having problems with. That one has windows 2000 server...cicso routers, Adtran TSU, and 3 com hubs.The site has been up and running fine for about 6 months then all the sudden network performance dropped at the one particular site. When I ping to or from the main site from here I am getting timed out about6-8% of the time, every time I ping it.I am thinking that this may be on Verizons end but would like suggestions to troubleshoot my end?

5 replies

by pctech

Hi,

I too would suspect Verizon as the culprit. Have you tried a trace route? This may not be conclusive, but could give you an idea where your latency time is coming from. Running a trace route from several areas across the WAN may offer you more evidence.

I hope this helps.

by curlergirl

I would agree that a tracert (trace route) would help - at least help you identify where the slow-down is occurring. Also, you might try just calling the tech support number for your provider and ask them to check for latency on that circuit. It may be that they will be able to identify a problem right away that it would take you hours to track down. Hope this helps!

by rg11

Verizon tested out fine, I changed out the router and tsu and got the same problems. I noticed when no users at this site are logged in everything works fine. I can ping our main location and get 100% success rate every time. When users log in that is when the problems begin...If they are logged in and I try to ping I get a 85% success rate...

This discussion is closed to new replies.