Question Locked

Types of RAM to keep in stock?

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am running a local repair shop and I'm having trouble figuring out what types of RAM I should be keeping in stock. Currently I order RAM for upgrades on a system by system basis, because I have to find compatible RAM and there are several types/speeds out now. So for the customer this means it takes longer to get their system back.

Does anyone from personal experience with this, keep certain types in stock so they don't have to order every time?

11 replies

by oh smeg

So if you are upgrading older systems you wouldn't be caring DDR3 RAM because you wouldn't have much use for it. Similarly if you are only updating new hardware you wouldn't have any need to carry SD RAM.

You need to look at what you actually use most of here. But having said that I only use Corsair RAM as I know that it's going to work with any Hardware that I put it into including Apple Products. As it comes with a Life Time Guarantee as well I'm offering the customers better value for money as well.

But as I don't do many Domestic repairs I'm not looking for the cheapest just the best you on the other hand may not be looking for the Top Quality but the cheapest and then you need to have more in stock as there can be problems associated with the No Name RAM not working in some systems that the more expensive stuff would otherwise work in.

Col.

by bens

It looks like I might have to do analysis on the biggest market, but typically I have been ordering a lot of DDR2 and DDR. My problem is that I'm not sure the speeds to keep in stock because they seem to range from DDR2 400 PC3200 - DDR2 1200 with about 10 speeds in between. See where I'm going with this? I do agree though about Corsair, I order Kingston as well.

by oh smeg

You can always use the Faster RAM on a slower M'Board without any adverse affects provided you are replacing it all at the same time and not mixing the RAM with existing installed units. This could cause Timing Issues to arise.

While not ideal as this isn't the cheapest option available using Faster RAM with Slower M'Boards isn't a problem other than the actual RAM costing more than it needs to for that upgrade.

In the case of DDR RAM today as it is getting old and little used all of the available speeds are no longer available or in the case of some of the slower stuff it's just too expensive compared to the faster stuff so many use the faster stuff as it can be cheaper to replace all the RAM at once particularly where there is Dual Chanel RAM in use.

That would save a lot in initial Stock and reduce the amount of RAM on hand that needs to be counted when things like Stock Takes are undertaken. It's much easier to count 10 sticks of the same stuff than 10 sticks of five different speeds.

Just a thought there though.

Col

by willcomp

Wait on DDR3 unless you see a lot of new, high end systems.

DDR400 (PC3200) and DDR2-800 (PC6400) are what I use most. DDR400 will work just fine in place of DDR333 and DDR266 (except some older DDR266 systems). Same for DDR2-800, works in place of DDR2-533 and DDR2-667 and most DDR2 systems use DDR2-800 or slower memory.

Crucial, Corsair, Kingston, and AData have all been reliable brands. I usually buy whichever one is the best buy at the time. Get dual channel kits and only sell as pairs.

I also recommend not stocking more than you normally use in about 2 to 4 weeks. It's amazing how quickly things can change in this business. Anyone need some ISA bus cards? I have a few available.

by oh smeg

VESA Video Cards for the ISA Cards. :D

I still have a couple of New 1 MEG Video Cards that I picked up somewhere in a batch of parts. Not sure that I'll ever need them except for Mystery Objects but I can not bring myself to throw them out either.

Now who would like some ISA Network Cards with both BNC and RJ45 Sockets on them I have about 20 that I pulled out of a Token Ring System when they moved over to Ethernet and wanted a Faster Network. These I will eventually [i]maybe[/i] use as one place that has Computer Controlled Machinery still uses a Token Ring and these cards are just not replaceable. :D

Col

by willcomp

Like your VESA local bus video cards, most of the stuff is NIB and parts were much more expensive in those days. Of course that was before Internet merchants and one had minimum orders to contend with.

I tossed a couple of VESA video cards not long ago -- used ones thankfully. Got tired of looking at the long things and thinking about what a pain they were to keep seated.

by bens

I seem to be ordering a lot of DDR400 too, but I wasn't sure about buying DDR800 with the thought that it should downclock on a lesser board.

So with regards to size, are you just keeping 1GB & 2GB Kits?

by willcomp

DDR400 -- 2x256MB and 2x512MB

DDR2-800 -- 2x1GB and 2x2GB (desktops)

DDR2-667 -- 2x1GB SODIMM (notebooks)

This is at present and will change with time.

by oh smeg

I tossed a lot of stuff when we moved back in January which I hadn't used in ages. Some I needed a few weeks latter but the one still getting to me is I packed up several Waste Toner Cartridges for a color Laser Printer and I'm yet to find them.

Col

This discussion is closed to new replies.