Windows Forum

Ask something
Discussion Locked

Unknown

0 helpful
2 replies

by padum_1

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I m using win98se,128mb,P2 machin at my home.When I go to print a document a massage appears like insufficient memory space can not perform the task
.Are u wana to restore the file as a reverse document.I hav Nortn 2003 Antvrs ,I check all fills.but nothing happen.
Plz reply me if possible.

2 replies

by tech_wiz03

Little lite on info here, but you can get a problem with the printing of documants if you have pagefile set to windows defaults which = 0 at start-up and entire harddisk as maximum. In essence if entire harddisk is considered dedicated to pagefile then any program can be refused access to the harddisk at windows descretion.

with 128mb of ram the maximum pagefile size that windows can use is 511mb therefore, first check and see if you have 512mb of free harddisk space and if you do set the maximum to 511mb. Secondly, to prevent windows from excessive thrashing and excessive fragmentation set the min swap/pagefile space = to maximum.

regards
rick

This discussion is closed to new replies.