Discussion Locked

VPN

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I connect to the Internet through a cable modem.

Can I setup my Windows NT workstation to allow family members in other parts of the country to
access my system through VPN?

4 replies

by erikdr

Providing your ISP issues a static IP address: yes you can basically.
Note however that facilities for peer-to-peer VPN are not included with NT Workstation (or W2K Pro or XP), MS reserves those for the server editions and even then sometimes 3rd party tools will be needed. So you'd need some 3rd party VPN tool to accomplish this.

Hope this helps a bit,

- The Netherlands

by tom.greendyk

You can't set up NT workstation as a VPN server to accept incoming VPN connection requests as you can with W2K server.

You can do what you're asking, but you'd need to purchase a separate VPN hardware device from Linksys, Symantec or other vendor.

Tom G

by tom.greendyk

You may also want to conider using GoToMyPC.com. For something like $15/month you can have a 1-user account.

It's like a web-based PC Anywhere. You make the connection to the gotomypc web account from your own PC and leave it in "listen" mode. Ifsomeone has a login/password to your gotomypc account, they can login, connect to your PC and see/use the desktop as if they were sitting at your PC.

Hope this helps.

Tom G

by chrisn

You can set-up a hardware VPN. Depending on the manufacturer a Static IP may not be required. The VPN router would simply set a security key and attempt to locate the lock on the other end of the pipe. The only device I have worked with on this issue is made by a company called netscreen.

This discussion is closed to new replies.