Discussion Locked

w2k server vpn only 1 nic behind router

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a windows 2000 server that has one nic installed. Internet access provided by a dlink 614+ router

w2k server(one NIC)--->Router(dlink 614+)--->Internet

I need to know how to setup vpn on the w2k server that is behind a router. Putting another NIC card in the server is not an option. Do I have to setup up passthrough on the server?(if so how do I setup this up) Can anyone give me a step by step setup? Can I setup VPN on the server with only one card? (if so How?

Thanks,

3 replies

by jschein

Yes, the d-link is an excellent router (i use it as well)... You just have to go into the router config and use the port forwarding on it for vpn and put in the port(s) you want available. You will also have to assign your pc a static i.p. address so if your computer is rebooted, it doesn't pick up a new i.p. through dhcp. That's all there is to it...

by jeaster

Is the Win2k server acutally on a LAN which is connected to a router (with the router containing a switch, etc, etc). I have done some rteading on this at MS website, and it is not possible to do if the sole NIC must support LAN traffic. You must have a NIC for LAN and a NIC for VPN.

This discussion is closed to new replies.