19 replies
by sdgzf Accepted solution
by wdavison Accepted solution
1. Start Registry Editor (Regedt32.exe).
2. Locate and then click the Default value under the following keys in the registry if this problem occurs with folders:
HKEY_CLASSES_ROOT\Directory\shell
If this problem occurs with drives:
HKEY_CLASSES_ROOT\Drive\shell
3. Click Modify on the Edit menu.
4. Type none in the Value data box, and then click OK.
5. Quit Registry Editor.
OR
Type the following at the command prompt:
regsvr32 /i shell32.dll
That's it!!!
by sdgzf Accepted solution
I just copy-pasted the regsvr32 /i shell32.dll
in the command prompt and my problem was totally fixed!! this is awesome. techRepublic has many talented members, and im not one of them, you are! thanks again!
by sdgzf Accepted solution
by sdgzf Accepted solution
by sdgzf Accepted solution
by older mycroft Accepted solution
I think my fastest was about 4 minutes.
As we scan around the TR board a new question may pop on just as we refresh our own browser display. If you spot it and can manage to answer quick enough, the time to the Original Poster getting a reply is mere minutes.
Of course it doesn't always work that way - due to the time differences around the World, some of us will be asleep when you first post your question. :)
by sdgzf Accepted solution
by rob miners Accepted solution
the question can be answerd by two people at the same time. ;)
It can be interesting. :)
< forgot the people :) >
by older mycroft Accepted solution
Just jump right in there.
I'm not foolish enough to deny that you could probably teach me a few things.
We are all knowledgeable of what we have studied/read, but experts in what we have experienced.
That includes YOU. ;)
by rob miners Accepted solution
to your knowlede on Notebooks. ;)
Your bag of tricks never ceases to amaze me. :)
by older mycroft Accepted solution
Mmm - 09.22 Hrs as I type this, so you are sitting languishing in the evening around 7 at night (give or take an hour).
Just about the correct time to be winding me up! ;)
by rob miners Accepted solution
I've got nothing better to do. I am in the shed away from the fresh colds and running noses up at the house. :)
1/2 an hour out 6.35 pm
by older mycroft Accepted solution
I once had to suffer the Aussie's complaining about their "bloody winter" when I was stationed on an Airbase down in your part of the world.
I say 'Airbase' - it was just some scrubland with a couple of strips of reinforced concrete, with C-17s, C-130s, and a couple of American bits of junk scattered around.
Hailing from Caledonia, I found the whole misery-thing quite amusing. :^0
Currently @ 09.51 hours the temperature at Tain Bombing Range is 19'C
Projected temperature at the Bombing Range is 24/25'C
[i]My browser picks up the Met info from the Bombing Range[/i]
:)
by rob miners Accepted solution
by Former member Accepted solution
And he knows what you are doing on your computer because he has put a spy bug in your computer. :) :)
Please post back if you have any more problems or questions.
by ic-it Accepted solution
The very first post from nino.y is to ask how he was able to answer so quickly.
Then there was a solution to an unasked question!!????
Unless the OP has another profile.
by seanferd Accepted solution
The original message was edited at a later time. :D
Edit: The edit time does not show in the tree or flat view.
Posted: 05/09/2008 @ 06:11 AM (PDT) (edited 05/09/2008 @ 11:20 AM (PDT))
Time of answer: Posted: 05/09/2008 @ 06:22 AM (PDT)
by rob miners Accepted solution
Remove the Video Card from the PC. Restart the PC and go to the Device Manager in Windows, right-click the entry for the driver for your onboard graphics card and select Disable. Apply the changes and shut down your PC.
Boot the PC and enter the BIOS One of these keys should get you in.
F1
F2
DEL
ESC
F10
Tip: If your computer is a new computer and you are unsure of what key to press when the computer is booting, try pressing and holding one or more keys the keyboard. This will cause a stuck key error, which may allow you to enter the BIOS setup.. Go to the 'Advanced Features? page and select to 'Disable Onboard VGA?. The wording and location may vary according to your BIOS, but you should be able to find it. Press [F10] to save changes to the BIOS and exit.
Shutdown and insert the Video Card. Reconnect the Monitor to the new card.
Your PC should now boot recognising your new graphics card and prompt you to install the new drivers for it in Windows.
This discussion is closed to new replies.
Trending Web Development posts
Sort by Trending