5 replies
by wfelderjr252 Accepted solution
by cmiller5400 Accepted solution
by Former member Accepted solution
That's quite a machine for simple print management.
Where is it stored? I'm reading your post that you notice this as a noise - I might also read that it is situated somewhere more accessible than we might expect for a rack mountable unit. I often see small business storing such a machine on a shelf in a cupboard that they also use to store stationary.
Check the environment - temperature? Is there a pattern in its occurence?
To help further, we really do need more information as to what you are experiencing and the environment in which it is based.
by dogknees Accepted solution
by Member 19291532 Accepted solution
It is difficult to tell if you are talking about some physical indication that it is speeding up and slowing down, or that you're seeing the CPU pegging in the Task Manager.
Beyond temperature and environment - if you're having periods where there is a lot of NOISE from the server, followed by the noise subsiding for a bit, then another burst of noise - I'd check to see if you've got a RAID that is rebuilding. Dell servers and PowerVault DAS enclosures make a TON of noise when they're spinning up all of their drives at once. If you've got a Raid 5 that is rebuilding, you're going to not only hear a lot of noise, but your system response will be dog slow. With a Dell PERC, I wouldn't be surprised if you're losing your Raid config and rebuilding frequently. It may not be a bad disk, it could be a bad battery module on the PERC, or possibly just the fact that your server is a Dell.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending