Discussion Locked

Win 98 box not connecting

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello all!

Have a story here so bear with me. I found that
my DHCP was not set up right, and since fixing
it my only Wind 98 box has not been able to
connect to the network correctly.

What I have found is if I set the WINS resolution
to "Uses DHCP..." and try to logon, I get a
"Domain not avilable to XXX your password..."
If I click "OK" and continue the log on, under
Network Neighborhood, I can see most of the
other terms (running wind 2000) on the network
but can not access any of the shared files. I
can not see the server (running 2000 sever),
but most of the client-server apps work.

Now if I set the WINS to "Enable WINS..." and
hard code the WINS server IP. I do not get
the error message at log-in, but I can only
see the server in Network Neighborhood. My
c/s apps still work, but I still cannot gain
access to any of the other terms.

IPCONFIG shows I am getting data from DHCP,
and correct IPs for DNS and WINS. I think
the error lies in the DNS or WINS server,
and not on the 98 Box?

Any feedback would help as I have to access
one of the term to run an app loaded on it,
and no, I can not move it to the server.

Thanks!
Ray

7 replies

by voldar

How much do you know about setting the network properties on a W9X computer? Because first of all you have to check on the Client for Microsoft Networks to see if you have the right Domain Name. Then you also have to check the "Log on and restore ... " option. Then you go further and on the TCP/IP properties, at the DNS tab - the only one that you have to change when you use DHCP - you should write down the host_name, the domain_name (FQDN) and add the DNS server IP address. Then you go further at the "Description" and you write on the WORKGROUP windown the name of the DOMAIN that you want to be a part of.
If all of these are correct - then type ipconfig /all and see if the subnetmask is the right one and if the WINS address is contained. I also sugest you to type ipconfig /release_all and then ipconfig /renew_all so that you have an updated record of TCP/IP DNS WINS etc. on your computer.
If none of these solve your problem you should think about verifying with another network card.

by rgilliam

A few more thoughts. This box worked find
prior to "fixing" DCHP. All the terms were
using internal IP address. So I know the card
is working, well sure that is it. I have checked
all the settings you talk about. Those are
correct. That is one reason I feel the issue
is at the server.

Thanks

by cg it

to check connectivity on a W9X box at the command prompt type winipcfg this will provide you information on what adapter your using, IP address assigned, submask, host, lease time. If the adapter shown is PPP and an IP address beginning with 169.XXX.XXX.XXX use the drop down menu and make sure your adapter [NIC] is listed. If it's listed, choose the NIC and at the bottom of the windows select renew.

Let us know what info is shown when you run winipcfg.

Note: You must choose client for microsoft networks in the NIC properties sheet from Network settings in the control panel to establish network connection.

by aliz

If?your?problem?is?gain?access?to?W2000?shared?folders?:you?must?login?to?w98?with?a?username&password?that?is?defined?on?that?w2000.

This discussion is closed to new replies.