Discussion Locked

Win 98/Win 2k home network.

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a small, two-computer network in my home. My computer runs Windows 2000 Pro, my wife's Windows 98 SE. The systems are networked through a 4-port router. I have set shared folders on both computers. There seems to be no problem looking in from the W2K system. From the Win98 system, I can see the W2K system in Network Neighborhood. When I try to access it, whether from the Explorer window or with a UNC command, I get an access restriction which asks for a password. Nothing will get through this. Even the Administrator password.

11 replies

by p. dickason, cne, mcse, cca

You have no problem browsing the win98 pc from the win2k pc because 98 has no security. At least security as good as win2k. To be able to browse the win2k pc from 98 you will need to create a user on the win2k pc with the same name of the user that logs on to 98. Wether you know it or not, win98 does need a user log in also but you may never see it because there was no password set on it so it doesn't stop and ask for it. Anywayz, make sure the user name and password match on the 98 and win2k account and you should be able to browse without a problem. Hope this helps.

by don

Answers #1 and # are both correct but, I might add that you want to check protocals and workgroups to be sure they are in sync too.

DM
Indianapolis

by sramesh2k

All the above answers are right. Here is some more info.

To network Windows Me or Windows 9x to Windows 2000, you need to remember a few key details:

Unlike Windows Me and Win9x, 2000/XP has built-in networking security, so you'll have to log on to an 2000/XP box before you can use it and, if you're wise, you'll password-protect that account. But after you do so, you won't be able to access shares on your 2000/XP box from Windows Me and Win9x machines. Here's why: In a Windows workgroup based on XP, Windows 2000, or Windows NT, you must supply valid credentials (your logon/password) before you can access network resources. And you must configure these logons and associated passwords on any XP (or Win2K or NT) machine on the network. So let's say you log on as "sally" to a Win98 machine. To access a 2000 machine on the same network, you'll have to set up a "sally" account on the 2000 box that uses the same password. After you set it up your network this way, accessing shares willwork the same way it did in Windows Me and Win9x.

by briantruitt

Continuing to beat this dead horse, I'm sure the password request is for the dreaded IPC$ account. If so it's definitely a workgroup/user situation. Like mentioned previously, just add whatever your wife uses to logon to the Win98 pc, you might have to look around if it boots automatically into Windows though. Side note, Windows 2000 NTFS partitions cannot be browsed by Windows 98 computers. NTFS can see FAT32, but FAT32 cannot see NTFS.

This discussion is closed to new replies.