Discussion Locked

Win XP Startup Floppy Disks

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can Anyone explain how to make a Win XP Pro. Boot Floppy?

8 replies

by stroke311

You can also down load them from Microsoft Microsoft. (Knowledge Base Article - 310994)
Just type 310994 in the adress box, you donot need www. Just put in the number. Frank

by dklippert

HOW TO: Create a Boot Disk for an NTFS or FAT Partition in Windows XP 305595

http://tinyurl.com/5vvu

"Create a Boot Floppy Disk with a Windows XP-Based Computer

Format a floppy disk by using the Windows XP format utility. For example, with the floppy disk in the floppy disk drive, type format a: at a command prompt, and then press ENTER.
Copy the Ntldr and the Ntdetect.com files from the I386 folder on the Windows XP Setup CD-ROM, Windows XP Setup floppy disk, or from a computer that is running the same version of Windows XP as the computer that you want to access with the boot floppy.
Create a Boot.ini file (or copy one from a computer that is running Windows XP), and then modify it to match the computer that you are trying to access. The following example works for a single-partition IDE drive with Windows XP installed in the \Windows folder, but the exact value in the [operating systems] section depends on the configuration of the Windows XP computer that you are trying to access:

[boot loader]
timeout=30
Default= multi(0)disk(0)rdisk(0)partition(1)\windows

[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\windows="Windows XP"

If your computer boots from a SCSI hard drive, youmay need to replace the multi(0) entry with scsi(0). If you are using scsi(x) in the Boot.ini file, copy the correct device driver for the SCSI controller in use on the computer to the root of the Setup disk, and then rename it Ntbootdd.sys. Change the disk(0) number to represent the SCSI-ID of the hard drive you want to boot to. If you are using multi(x) in the Boot.ini file, you do not need to do this.
Start your computer by using the floppy disk, and then log on to Windows XP."

by thechas

For the XP startup disk set (for installing XP on a PC that will not boot from a CD drive, you need to download the correct file from Microsoft to create the startup disk set for your version of XP

Home
winxp_en_hom_bf.exe
Pro
winxp_en_pro_bf.exe
Home w/ SP1
winxpsp1_en_hom_bf.exe
Pro w/SP1
winxpsp1_en_pro_bf.exe

The 'en' is for english. Other versions are available.

Run the program to create the startup disk set.
I believe it takes 5 or 6 floppies to create the full set.

Tocreate a 'bootable' floppy disk for things like flashing the BIOS:

Double click on the My Computer Icon.
Right click on the floppy drive
Select Format
Check the box labeled Make MSDOS bootable

Chas

This discussion is closed to new replies.