Discussion Locked

Win2k server

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I got Win2k server with few workstation..

I set a batch file script for mapping drive..
let say net use f: \\mainserver\example /yes and sometimes the map drive theres an red sign X and somtimes disconnected.. why is it not consistent..

i even tried without hub, a cross cable..still the same..why is it so?? Even with clean Win2k server installation w/ Active directory installed properly..

Please help...

7 replies

by tduval

But when you click on red crossed drive, connexion come back, and everything is allright ?

Seen before, repared by applying services packs.

by gyroscope

This is an auto disconnect feature. After a certian amount of time the drives will disconnect themseleves from the server to save server resources.

You can fix this on the workstations by editing the registry:

Click Start, click Run, type regedit (Windows 2000 or Windows Server 2003) or type regedt32 (Windows NT 4.0), and then click OK.

Locate and then click the following key in the registry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters

In the right pane, click the autodisconnect value, and then on the Edit menu, click Modify. If the autodisconnect value does not exist, follow these steps:

On the Edit menu, point to New, and then click REG_DWORD.
Type autodisconnect, and then press ENTER.
Click Hexadecimal.
In the Value data box, type ffffffff, and then click OK.

If you want more info on this feature:

http://support.microsoft.com/?kbid=297684

http://support.microsoft.com/default.aspx?scid=kb;EN-US;138365

(after pasting these links to your address bar verify there are no spaces between characters)

Hope this helps

SLM

by joseph moore

Win NT/2K/XP all have a Autodisconnect setting. This setting is what changes active mapped drives to having the red X symbol you are seeing.

Run the following line at a Command Prompt on all of your workstations and on your Win2K server (make sure to run it EXACTLY as written):

NET CONFIG SERVER /AUTODISCONNECT:-1

That should stop it.

hope this helps

This discussion is closed to new replies.