Discussion Locked

Win98 Shutdown Problem

0 helpful
21 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
During shutdown, computer hangs on the Win98 watermark.

21 replies

by zuikaku

Advanced Power Management is often the cause of this problem. I would make sure that APM is disabled in the BIOS first, then I would disable APM in Windows if the problem continued.

To disable APM in the BIOS, you must get into the BIOS setup screen. The way to get to this screen varies from system to system, but generally you'll see something like "Press DEL to enter setup" on the screen when you start your system, so you would press the DEL key at that time to get into setup mode. Once in the setup screen, look for an option called "power management" or something similar, then set that option to "Disable".

In Windows, you can disable APM by going to "System" in the Control Panel. Expand the "System Devices" branch on the "Device Manager" tab. Click on the properties for "Advanced Power Management support". On the "General" tab, check the "Disable in this hardware profile" box to disable APM.

by avachon

Hi, this is a known problem for 98, especially SE (but first addition as well though not as frequent). Microsoft has a patch on its website for 98 (not SE) as well as a troubleshooting article in its knowledge base (search under 98 |shutdown problem). You can try the 98 patch- Hope this helps (www.microsoft.com)

by wwng1

Sometime antivirus software also can cause this problem. May be try to uninstall the anti virus software and see the problem still exist.

by clover252525

Go to START/RUN and run msconfig.exe; in the GENERAL tab under ADVANCED, unclick fast shutdown. It may be all you need to do.

clover

by lon3m3

Microsoft does have a fix look under search Knowledge Base. You might also try: click start, click run. Type msconfig and click ok. On the "general" tab select "selective startup", then click the startup tab. Try deselecting the options that load atstartup. You will have to restart after each time you close the dialog box. Any or all of the solutions offered may work, however the problem may very well come back as this is a well known issue with WIN98,

by mg

hi, if you are in a network, try disconnecting ALL network drives before you shutdown your pc. i used this as a workaround for the same probs on my pc.
the other possible change you can make is:
change your power on/off button to a sleep/wakeup button in your BIOS.
get luck, RealFlex !

by netwill

got any TSR Anti-virus software on? If so, you might want to check with the vendoer. For mcafee, try disable scan flooy drive on shutdown.

also, download the shutdown supplement from www.microsoft.com

This discussion is closed to new replies.