Discussion Locked

Windows 2000 domain client permissions i

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a problem occurring on a Windows 2000 domain with about 20 (windows 2000) clients. Two machines out of the twenty, one of which is brand new, seems to be somehow inheriting incorrect permissions. Any user that logs into the machine cannot run most of the software unless they are set with Domain Administrator priveledges.

I have tried setting users to local Power User, local Admin, and network Admin. Nothing seems to make any difference unless the user is set as Domain Admin.

I've completely reinstalled one of these machines, and I'm still getting the same problem. (One of them is a brand new Dell workstation, the other is an older machine that was reinstalled.)

I've tried importing the COMPATWS.INF group policy, to seeif that had any effect. It didn't.
I've checked the standard group policy, and it doesn't seem to be any different from any of the other machines on the Domain.

I've run GPRESULT, and the only real difference I'm seeing is that standard users seem to be missing the 'profile single process' permission.

Both machines were clean W2K installs, and the software that they are unable to run is locally installed on the machine. (One of the pieces of software they are unable to run is a FoxPro based DB application, the other is Quickbooks) In both cases, the software, installed locally, doesn't run, and it gets errors in accessing and changing folders as if the user does not have the permissions to access them.

I've also verified that the accounts in AD on the server are correct, and I've tried deleting and recreating them. This also seems to have no effect.

At this point I'm not sure what else I can do. Are there any other utilities out there that might give me a clue as to what's happening?

Any other ideas would be appreciated.

15 replies

by winterfrost

What kind of error messages are they receiving? In the past I have used auditing to determine where the problem lies as it is frequently a file-permission issue. Try enabling auditing for "failed" attempts to access files in suspected directories,or (temporarily) on the whole drive and review the results.

Also, I have found a number of applications which register certain components for individual users. Sometimes giving a user local Admin rights, logging in and launching those programs once, then logging out and removing the Admin rights is enough to successfully register the components it needs for that user.

by kmhargis

An example of the error messages I'm receiving would be, with Quickbooks (2000 edition), I'm getting the error "QuickBooks could not locate a valid Installation Key Code." when I try to run as a user that has less than Domain Administrator privs. According to Intuit, "You can receive this warning when attempting to open QuickBooks if:
You have logged on to Windows with insufficient permissions after installing QuickBooks. The preset user in Windows 2000 and Windows XP is a Restricted user, having restricted access to the Windows registry.
You have not been set up as a user on the local computer. You may be set up with a sufficient permission level (Standard or greater) on the server, but not on the local computer you are currently using. Since QuickBooks accesses the local computer registry, it is necessary for you to be set up as a Standard (or higher) user on the local computer."

The user that the machine is supposed to go to has an account on the local machine that is set to Administrator privs, and is set to Administrator privs on the Domain. And I still get the error.

Everything works if I log into the local (PC) domain, rather than the network domain. But if I do that, and log back into the server domain, the errors continue. And none of the other machines on the network have had any problems with running the software while logged into the server domain. (The two pieces of software I'm primarily looking at are Quickbooks, and a property management software by the name of Property Boss)

by jaboy78

if the user name is let say bob and domain is company1

After u have log into the server on the workstation(Win2k Pro)
Go to control panel..select users and password

add user "bob" with domain "company1"
It will prompt u for administrator password..This password is ur own Win2k prof password.

Set the user "Bob" as administrator rights.

After that, try to restart and see.

by kmhargis

The user accounts I am testing with already exist as local accounts on the box I'm having problems with. And they are already set to local Administrator and local Power User. I'm also confused as to how I'm supposed to Add a user with a domain, from within local Users and Passwords settings. Could you be a little more clear?

by jeaster

is the Domain Users group (or other appropriate security group) in the local users' group? It sounds like it is a file permissions issue, and somehow the permissions on sections or the registry of file system have become set so that standard users cannot access them

by kmhargis

jeaster,

No, nothing that obvious seems to have happened, but yes, it seems like something is resetting the permissions, or keeping them from inherinting correctly. But aside from adding the two test users I have on the box, nothing else has been changed on the user setup on the box, and I looked at all of it pretty carefully. Nothing seems to be out of place, and I can't think of anywhere else to look.

by tictag

Please be aware that the above member (Jeaster) may have already answered your question.

The rights a user has are generally defined by locally set permissions. Additionally to this, domain accounts generally have NO access rights to do anything. All the access a domain account carries is defined by its local group membership.

To cut a long story short, the Domain Users group MUST be a member of the local Users group, as stated by Jeaster.

Tictag.

FURTHER INFO
When logging on with a domain account, it does not matter what groups the local account is a member of UNLESS you add that domain account into the appropriate local group. For example, you want a domain wide group that has power user permissions locally. Create a domain group and add the appropriate member accounts then, add this domain group to the local Power Users group ? this can be remotely scripted.

by kmhargis

Tictag, thanks for clarifying the answer. You are correct, Jeaster did in fact answer my question and solve the problem for me. Thanks to both of you! (After hours and hours of banging my head against this, it's greatly appreciated!)

by kmhargis

Curacao,

Thanks for the info, but I had already been using tools from the resource kit, including GPTools and GPResult. I appreciate the comment, though.

by jeaster

I think the way to solve this would be to test my theory would be to add a domain account to the local users group. By default, domain users are not members of local groups unless you add them specifically. This can be a real pain since permissions are ofter based on local groups, instead of doamin groups in which users are automatically members.

by kmhargis

Jeaster,

Thanks again. My apologies for not understanding it until Tictag clarified it for me. Thanks to both of you. I'm splitting the points between you, and I've raised it to 2500.

This discussion is closed to new replies.