Discussion Locked

Windows 3.1 and CD-burners

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I currently work for (summer job) the Skin Science Institute at the University of Cincinnati. We are invisigating the devolpment of Cellutite. I am kind of the "tech" person on this research project. One of the many insterments that we use in a Ultrasound prob that is hooked up to a OLD windows 3.1 machine. The prob is made by CyberDem, if anyone is interested. The scans that the prob makes are analized in 3D. Because of how the software was writen we can not use it on another machine. Simularly, we can not upgrade the operating system.

We were tranfering all the information via zip, but it's to slow and has constant errors. So I searched for a CD-burner with a parallel cable and would be comparable with Windows 3.1. I found one. Microsolutions' Backpack cd-rewriter (194200). I just (today) recieved it. And of course, it ended up not being compadable. The computer can read CD which are placed into the drive, but can not burn anything.

The only option that I see is to write a new driver for it (I write Linux drivers all the time), but I would perfer not to. Is there a driver or burning software out their which works with Windows 3.1? Do you have any other solutions. Feel free to either list your thoughts or email me at mbh0620@rit.edu .

Thanks for your time,
~Matt Hicks, A+, Linux+, MCSC

5 replies

by curacao_dejavu

I have a couple of questions and remarks.
First can't you just copy the folder, if the program is dos based you should be able to do so.
Second, as you probably know, by the start of 2004 MS will stop all support for win98 and winnt so I suggest to look for a upgrade version of the software to run on a newer os.
A option would be to install a nic (dos based of course) transfer via the network to a shred folder and burn it then.

Leopold

by timwalsh

There are really two separate issues here.

First is the driver that allows your operating system to recognize the drive itself. If you can read CDs, the driver is working as it should.

The second issue is CD-Burning software. You still need specialized software to burn info on the CD once the driver allows the drive to be recognized by the OS.

What CD-burning software came with the CD-Recorder? Is the software compatible with Win3.1 and/or DOS? I could only find one company that offers any kind of CD utility for DOS. Take a look here - http://tinyurl.com/i2yi

by jackofalltech

I believe I have the best short-term solution. Get a newer PC with W2K and install the drive from the old PC as a slave, use the free XOSL (www.xosl.org) to dual-boot, use the W2K partition to burn the CDs.

Ralph

by cg it

Tim really has it right in that you have two issues. The driver, which as Tim pointed out, if your W3.1 system can read CD's the driver is working. Second is CD burning software compatible with W3.1. An option, as another answerer suggested is that since Dos,W3.1 are FAT, you could take the drive and install it as a slave into a W2K machine that is FAT32. Burning CD's on that computer.

All answers I've seen could/can resolve your problem, with taking the drive and putting into a box that's FAT32 and burning the data onto a CD with that one as the lowest cost method.

This discussion is closed to new replies.