Discussion Locked

windows starts only in safe mode

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i recently installed directx 9.0a on my pc with windows 98 SE. After the installation, i can only start the windows in safe mode. If i start it in the normal mode, it freezes and someitmes i can't even see the START button. I tried restoring the registry, it didn't work either. Instead, when i checked the restored registry file in the registry restorer, it said NEver started along with the time i tried to start it. Could anyone suggest a solution for this?

Thanks

12 replies

by oz_media

It sounds like you have a graphics card issue.

1) Ensure your card is DX9 compatible by visiting the manufacturers site, they may even have a DX9 driver update. Install the latest set of drivers.

2) When in SAFE MODE, click START>RUN and typeDXDIAG into the command line.

3) This is the Direct X diagnostic tool, run through the various tests to see if DX finds the error or warns of incompatibility.

NOTE: The Chas will probably be along shortly with a more definitive solution but it's worth chescking for updates in the meantime.

by thechas

Oz is correct.

If the driver for your video card does not support DirectX 9, your PC may become VERY unstable.

From safe mode, in Display Properties, switch to a standard VGA controller with 16 color 640 * 480 resolution.

I recommend that you update both the chip-set drivers for the motherboard and your video card driver.

If there is not a DirectX 9 compatible driver for your video card, I recommend going back to DirectX 7 or 8.

There is a utility to remove DirectX 7 and 8.
http://www.voodoofiles.com/3117
I don't know if it works for DirectX 9.

Chas

by fred07

Hi and I add the above are both correct AND some of the 9X downloads are for XP and will screw up a 98, 98se, or ME OS to the point you will have to save and backup everything and do a full format and start over.
Ie 6 enhanced for XP or anything enhanced for XP will cause problems with any other OS.
Sorry and take it up with M$ as they wrote it that way.
fred

by cglrcng9

It is my direct experience that there hasn't been any DirectX 9.0 update problems on any Windows OS that I have done that wasn't remedied by updating the video card driver w/ 1 that was written specifically for use w/ DirectX 9.0 yet. It will solve all kinds of problems from the 1 you are experiencing to restart & shutdown hangs. I have no understanding why MS doesn't list that on the update site as a definite pre-requisite "before" downloading or updating to DirectX 9.0. But I do agree w/ the system board driver update also.

by livesfreely

Thanks to all of u for responding.
I did use the dxdiag.exe. Under the network tab I have two files missing-- dpnwsock.dll & dpnmodem.dll. Also, it shows that i have directx8.1 installed currently. For everything else it shows no problems.

I wasable to log into normal mode in win98 by reducing the harware acceleration to minimum. The screen that appears is fuzzy. It did work for one time, but I don't know if it'll work again though.

by oz_media

Sounds like you're almost there.
Id DXDIAG is reporting version 8.1, your DX9 was a bad install.
Try reinstallnig it again, but make sure you have compatible video card drivers first. A fresh copy should replace the skipped or missing files.

by livesfreely

I formatted my hard drive and reinstalled win98se. I could start the computer 2 or 3 times before it started freezing while in the process of loading desktop. Even ctrl+Alt+Del won't work. I've formatted 3 times by now. The problem still persists. Can anybody suggest why?

by wmarr

Reinstall your sound and video drivers. Also, you could do with reinstalling the operating system.
don't format, just go to the cab files and reinstall it. It is most likely that some dlls are missing or corrupted. Also, you can try reinstalling direct X 9. I am running it on windows 98se, o/b sound and vidio, no problems.

by livesfreely

Thanks wmarr! I didn't know how to restore the drivers. I got somebody to do it and it worked. I still don't know how to do it because it was not done while i was there. Can u tell me how to? Thanks a lot for your help.

by cglrcng9

Finding a compatible DX9.0 Video Driver for your graphics card seems to be the key, if not I suggest you update the graphics card to one that you can find a DX 9.0 compatible driver for. I also had restart problems until I did (no shutdown problems though). After the update everything is very smooth.

Good Luck.

by oz_media

Reinstalling Windows drivers:

I think what WMARR was aiming at was reinstalling Windows to replace the needed Windows system files and changed dll's .

There are TWO ways of doing this, the first is to click START>RUN and type sfc.exe this will open the system file checker, you can set it to scan for altered files in which case it scans the sys and dll's for changes from the originals.
When it finds a file that has changed,it will reinstall it and get yo to reboot to updated the sys.

2) Insert the Windows disk to the CDROM with a Win98 startup floppy in the 'A' drive, when you get to the DOS prompt change the directory to the CDROM drive (which will be moved ahead one letter, i.e. what was D: will now be E: ((only until restarted))
So type D:\Setup and the disk will rerun the Windows setup while retaining all your settings and installed programs, no reformatting or wiping of drive is performed. ONE problem with this is that if you DO have a corrupted DX installation, it probably won't fix it until DX is reinstalled.
It only replaces the Windows files.
So it looks like more than one person has helped you with your DX driver problems, don't forget to allocate your points.

Happy computing,
OM

by oz_media

Reinstalling Windows drivers:

I think what WMARR was aiming at was reinstalling Windows to replace the needed Windows system files and changed dll's .

There are TWO ways of doing this, the first is to click START>RUN and type sfc.exe this will open the system file checker, you can set it to scan for altered files in which case it scans the sys and dll's for changes from the originals.
When it finds a file that has changed,it will reinstall it and get yo to reboot to updated the sys.

2) Insert the Windows disk to the CDROM with a Win98 startup floppy in the 'A' drive, when you get to the DOS prompt change the directory to the CDROM drive (which will be moved ahead one letter, i.e. what was D: will now be E: ((only until restarted))
So type D:\Setup and the disk will rerun the Windows setup while retaining all your settings and installed programs, no reformatting or wiping of drive is performed. ONE problem with this is that if you DO have a corrupted DX installation, it probably won't fix it until DX is reinstalled.
It only replaces the Windows files.
So it looks like more than one person has helped you with your DX driver problems, don't forget to allocate your points.

Happy computing,
OM

This discussion is closed to new replies.