Question Locked

Windows XP Test Page - changing the design of it

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Except for the Windows Logo in the upper left hand corner, there is no special test of color for this test page. It would be nice to add Magenta, Cyan, and Yellow stripes across the page to prove that the ink is flowing uniformly. Does anyone know how the test page is formatted. It says is in RAW format. How is it constructed? Could that script be modified? Where would one save it?

4 replies

by kenone

have a color test page or at least a demo page that will do what you want. Sometimes they're built right into the printer firmware. You'll have to read the docs.

by older mycroft

Therefore if you want to ascertain proper 'flow' of Yellow, Magenta, Cyan (in the correct sequential order that they are printed!) you should really go with the Test Pages built into each printer's own hardware.

If you were to make a print request based on what you saw on a monitor screen, and the Gamma had been altered for user preference (or more importantly, had never been professionally adjusted for Hue) the resultant output from the printer would give a false reading of colour values.

Best to stick with what has been coded into the printer's firmware at the factory.

by older mycroft

[u][b]Additive Synthesis:[/u][/b]
Monitors build colours from the 0% point of the visible spectrum (on top of a black background) in shades of Blue, Green and Red.

[u][b]Subtractive Synthesis:[/u][/b]
Printers on the other hand remove colours from the 100% point of the visible spectrum (layering ink onto a white background) in shades of Yellow, Magenta and Cyan. [i]Black ink [Kohl] is added due to an aberration of light that results in the assembly of the 3 printing inks only accounting for 98.42% of the visible subtractive spectrum.[/i]

Thus, to accurately display Yellow, Magenta and Cyan you would need a monitor that was WHITE by default, and since they're not, you cannot. ;)

FYI -

A BLUE filtered negative is used to make a YELLOW printing plate.

A GREEN filtered negative is used to make a MAGENTA printing plate.

A RED filtered negative is used to make a CYAN printing plate.

Thus BLUE, GREEN and RED are photographic filters that each remove 1/3rd of visible light which is then equivalenced into YELLOW, MAGENTA and CYAN when printing. :)

This discussion is closed to new replies.