Discussion Locked

WinXP Home Faxing and WinFax Problem

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Customer has WinXP Home edition - all current updates done. With either builtin fax support or with WinFax 10.02u the machine will comfortably accept the first fax. When a second fax comes in the computer attempts to answer but the connection is never made.

Have uninstalled/re-installed the software; the modem drivers (HCF modem) redone the default setups; tried all the suggestions in the symantec FAQ with no success.

My hunch is that it is in the WindowsXP software but not sure what totry next!!

Open to any help and suggestions.

Thanks

Al

1 reply

by elomis

My only guess (and it's pretty lame) is that the incoming faxes are being routed to either a directory on the PC, or a printer on the PC, and there is a problem with one or both. Check the drive that holds the incomming fax archive isn't full and that there isn't a problem with the print queue that the fax is going to. If the first one gets stuck or corrupted it might ignore the next. Further to that if there is a problem with the fax routing it might not hang up the fax modem properly when the problem occurs.

This discussion is closed to new replies.