Question Locked

XP hard drive in new computer, will it work?

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm in the process of building a new computer, and to save money, I'd like to use the hard drive (and OS) on my current computer. I'm pretty sure simply plugging it in will not work, as the hardware (X2 5600+, 2g ram, 8800gts) is vastly different from what I've got(xp 2600, 768 ram, fx5200).

If this works, I'd like to set up raid 1, and copy the existing OS and data, then set up a dual boot with vista home premium.

Is this doable?

8 replies

by langlier

It could work. However most likely they are not and thus you will need to format the hard drive (preferably after backing up any data) and then reinstalling the OS after moving the HD to the new PC.

by ic-it

It is likely that your Chipset is not the same. If too different you will need to run a repair and reapply all the patches.
Of course if this was a manufacturer's install, you may not have an OS disk that can accomplish this.

by langlier

I've had them work before but its less then 40% success rate.

by ic-it

I've only done about 50 of them; all successfully.

by langlier

Most of mine weren't. It was a case of the old MB/Proc died and the new purchased one was whatever the guy could afford. And over a 5 year period ive done... roughly 60-80. It can work but sometimes even though it seems to have worked there are errors.

by ic-it

If the chipsets are different you will need to do the repair and then all the updates. If the same chipset (sometimes even close series) you won't even need the repair. We often use this when a users is receiving a new model and has way too many programs installed to apply our basic ghost image.

by tlandon5

thanks for all the responses.

yes, the chipset will be VERY different. Im moving from a VIA KT266a to nForce 570 SLI.

This discussion is closed to new replies.