14 replies
by superkknd
here.. try to disjoint from domain
then remove "Client fro Microsoft Networks Service", then restart you PC. Add your Client fro Microsoft Networks Service back, then join back the domain again. hope it helps u
by hpoppe
by joseph moore
I just think your XP box is having authentication problems.
Try Technet article Q180094 for the how-to on using the LMHOSTS file to handle authentication. Basically, put in the IP address, machine name and NetBIOS domain name of your Win2K domain in the LMHOSTS file on the XP box. Reboot, and see if that takes care of it. The URL to the article is here:
http://support.microsoft.com/default.aspx?scid=KB;EN-US;Q180094
(please remove any spaces)
I've used this on an XP machine and it did fixa simiar problem (also works on NT & 2K).
If this is not it, then you might have a misconfiguration in the Local System Policy on the XP box. YOu can tighten the security on XP (and 2K) so that only admins can log onto it. But I think the LMHOSTSis the fix for you.
hope this helps
by hpoppe
by rvkempen
It might be a sid problem.
You have six comps with the same sid.
try using sysprep, reboot, and fill in the information needed by rhe mini setup.
Good luck.
Ron
by hpoppe
by beermonster
Hi,
The issue here is that your laptop is unable to find the domain controller \ s for your domain. The original admin account can log in because it has cached info from an initial login, the OS attempts to contact the domain, can't find it, andlogs on the admin using the cached info. Any other accounts, not having cached info, are rejected. You can confirm the ability to contact your domain by running
ping yourdomainname.com - (or org or whatever your extension is)
You should get areply back from the ip of one of your domain controllers. If not, then check the IP config of the laptop - esp the dns settings.
Note that were you to have no comms at all you would receive the message 'netlogon service not running' - bit confusing that one 'cos it is, it just can't find the network. The netlogon servicve not running at all - as a previous respondent suggested, would stop anyone logging on - including the admin - which is why I'm inclined to believe that name resolution of SRV records is the issue.......
by hpoppe
by canucker
by hpoppe
by hpoppe
by hpoppe
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending