Discussion Locked

XP won't install after CPU upgrade

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have WinXP pro, and I had it installed to my AMD 1800+, SB live value, geforce4 4400 Asus A7V333 and when I upgraded my CPU to a 2400+ WinXP would only boot to the last splash screen and give a 7b stop error after sitting for an hour or so. I tryed a fresh install with the same problem and I even bought a new WD 60gig and tryed the install with the same problem. I took out the SB live value card during these installs. I reinstalled WinME and it's running fine. But I hate having bought a full version of WinXP and can't use it. I've called Microsoft's tech support without solving the problem.
Thanks for any help,
Pete

9 replies

by thechas

First, check for a newer version of the BIOS from Asus.
The problem may simply be a BIOS bug that was corrected by an update.

DO NOT flash the BIOS unless the update specifically addresses the problem that you are having, or problems with the faster AMD CPUs.

Next, check the CPU speed settings in BIOS setup.
Verify that the FSB and multiplier are set correctly for your specific 2400 CPU.
(Download the specification sheet from AMD to verify the settings.)

Chas

by pete42

I flashed the BIOS from 1006 to 1015 so that I can run up to a 2600+ CPU with a 266FSB not long after I got it.On bootup it detects the 2400+ ok. I think I may have a problem with WinXP thinking I'm trying to install to a different computer and stopping the install because of the different CPU. If that's possible? I have since installed WinME and Linux 8.0 (dualboot)and it runs fine.
Thanks and any more ideas?

by thechas

My best idea at this point, is that your RAM is not fast enough for the 266MHz FSB of your new CPU.
I suspect that the RAM speed is right on the edge of being able to function with the faster FSB.
You do have PC2700 or PC3300 DDR RAM correct?

Me and Linux work because they are not taking full advantage of the faster speed of the XP2400 CPU.

You can install Windows XP as many times as you wish.
You can only automatically activate it once.
After the first activation, you will be given a hardware identification string, and a phone number to call Microsoft.
If your system configuration is nearly the same as when you originally activated XP, Microsoft may not even ask any questions before giving you an activation code.

Chas

by wcp

You stated that the problem started right after you upgraded the CPU. This meant the CPU might be the cause even tough it was new.
Now you flashed the BIOS, the M/B should accept the new CPU without any problem.
Here is how to verify whether the new CPU is indeed the culprit.

Put the XP1800+ in and fresh install Windows XP Pro in the WD 60GB hard drive (HD). After the Windows installation, turn the computer on and off several times. If there is a problem, then it is by hardware (HW) and needs to be identified. If there is no problem, install the motherboard and other HW drivers. Install a few programs and run them. Turn the computer on and off several times each time you install a driver or a program to make sure there is no problem.

Once this is done, replace the CPU with the new XP 2400+ and FRESH install Windows XP Pro again in the same HD. Do the rest of the installation as before. If there is a problem, now it is certain that the new CPU is the bad guy. If there is none,somehow something else caused the problem but the Windows works fine so who cares?

by dkmc00

If your copy of WinXP required product activation
the first time you installed it,then you won't be
able to install it again on the same computer with a different CPU - because this changes your
hardware config. The CPU is one of the items WinXP uses to generate a hardware hash.
Also the HD has to be the original one.
Hope this helps.

by pete42

I thought this might be what the problem was. I work in an IT department and my supervisor said he had the same problem and a microsoft tech had to walk him through getting XP to re-install.
Thanks for all the great answers!
Pete

This discussion is closed to new replies.