Discussion Locked

XPert discourse

0 helpful
141 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

There's no better time than the present, network admins and support pros, to post your XP questions, enter comments about our XP e-newsletter, and offer suggestions for future tips.

If you haven't subscribed to our free Windows XP e-newsletter, you're missing out on some great information. Subscribe today!

https://www.techrepublic.com/techmails.jhtml?repID=r001

141 replies

by mburton

How about creating a new mmc and save it on the desktop?

1. Go to run, type ?mmc? hit OK.
2. File ? Add/remove snapin.
3. Add.
4. Choose Device Manager.
5. Click finish. Click close. Click OK.
6. There?s your mmc containing Device Manager.
7. Save it to your desktop, or save it else where and create a short cut.

Cheers

by deadly ernest

Not sure you can actually get the Device Manager on the desktop, but I have a quick access method.

Open the 'Administrative Tools' window (I used to go through the 'Control Panel') and then right hand click on the 'Computer Management' icon and hold it down whilst you drag it over to the desktop and release it and choose 'Create a shorcut'. This admin tool has a direct access for the Device Manager, so it is just a case of two quick clicks after the shortcut is set up.

by homey

Another way to get to Computer Management is to right click "My Computer" on the desktop (if you've put it there form the Start menu) and then click "Manage". Device Mananger will come up in the left hand column.

by velasco0

Right click on your desktop, go to NEW than SHORTCUT type in devmgmt.msc click next, than name the shortcut whatever you want.

by rodge

Right click your desktop and select: New, shortcut. Enter "devmgmt.msc" as location of item. Name the shortcut "Device Manager" or another descriptive name.

by hanzajohn

Start->Run->MMC
In MMC windows, File->Add/Remove Snap IN->Standalone->Add->Device manager for local computer.
Close intermediar windows and save the MMC on Desktop or place a shortuct of it wherever you need.

by mstanton

Right click on the desktop, choose New - Shortcut. A wizard will open. Type devmgmt.msc as the location.

by thechas

One thing that does 'bug' me about XP is how much longer it takes to perform a simple search in Windows Explorer compared to Windows 98.

A related problem, is the delay when you choose to save a file in other than the default folder.

I have reduced the delay when changing from the default folder some by going into user profiles and deleting all the shortcuts in recent documents.

Is there any other ways to speed things up?

Is there some simple script I can run to clean out the RecentDocuments folder?

Might make a good article.

Chas

by ___._

To increace the spped of searches, you have to index the contents of the area searching. If you look at the properties of your hard disk, there is a tick box to activate. Note: Also you must start the indexing service on the pc.

by moreorless

Never tried indexing (out of site, our of mind) until reading your reply. Have turned it on but now have a dumb question concerning the directories being indexed. While looking at the directories under Indexing Service in Computer Management I finda plethora such as:
C:\Documents and Settings
C:\
C:\Documents and Settings\*\Application Data\*
C:\Documents and Settings\*\Local Settings\*
Would like to know if these are 'default' settings when XP comes out of the can, or, more likely, random clicking on the index option while viewing various folder properities? Basic question is; Once C:\ is listed, are any of the others necessary?

by nothanks1900

I think one of the most handy aspects of XP(and probably one of the lesser known aspects) is the Program Compatability Wizard. Which loads support for older programs that were not designed to run on an NT system. Works great, ........so far :)

by been there

I have a Bible program Quickverse that I started with in Win 3.X went to Win 95 then to win 98. But it wont work in Win XP home ed. It was from Parsons (whose been bought out by someone else). I tried using PCW. and every way from sunday to no avail. I always get the pop up window PROGRAM ABORTED. Even before the program has a chance to run. Called Parsons, know what thier answer was? "upgrade to our latest and that will solve your problem" Great technical support HuH!!

by damianthex

I have built a small office network using various OSs. My host computer is running XP as well as four other computers on the network. The XP machines transfer data at 100Mbps. The ME machines transfer data at 10Mbps. The one 98 machine has been a bear, so I'll burn that bridge later. Why is the data tranfer rate different for the different OSs?

by poppy

Are you sure your network cards are all 100mbps? Sounds like they are various speeds. Your hub could have something to do with it too. Replace your cards and then try again. They should all be 100mbps to transfer data at that speed.

by cigarguy

I had a very similar situation. I found that the problem was not with the OS, but with the 3COM 3C905 NIC. The only setting that "worked" was 10Mbps. Have you tried other settings on the card?

by tomsal

As others before me stated about checking your hub/switch capabilities as well as those of your NICs -- they are right.

Its not the OS that determines the speed of your network (remember I'm writing this for Windows XP, not any other OS). Ethernet, or I should say Fast Ethernet since you mention 100mbs -- is a standard, the OS's only responsiblity really is to comply with that standard for interoperability, realiability, etc. etc.

And judging the huge popular of Ethernet -- which one of us would use an OS that DID NOT support the Ethernet standard? ;)

That said even though I'm 99% sure the advice on your NICs/hubs,etc. will fix your problem...you may want to verify what drivers you are using for your NIC as well.

Its not impossible for a NIC driver to "fudge up" and cause weird performance. Happened to me before.

later.

by agrogen

As Poppy stated, check your NIC's if they are all 100 mbs cards and your switch/hub is a 10/100. Then go to the properties of the connection, click on "configure" then click on "advance" then verify the speed and duplex settings on the card, considering you have a small network they should all be set on "autosense", if they all are and the cards are all 100 mbps card, then manually set the speed to "100 mbps full duplex"

by deadly ernest

As previously said, check that the network cards and the hub/switch are 100mbps and that the property settings are the same and set for 100mbps full duplex. Also check all the hubs and switches are set to 100mbps.

Also some NICs will drop to 10mbps if they have trouble matching with the other end on autosense or one is set half duplex and the other full duplex.

As a general rule it is best to have everything hard set to 100mbps instead of autosense.

by joshwithers

It is a known issue that "Microsoft Driver Publisher" siugned drivers for NIC's are generally slower, yet more compatible than some. Always Update your NIC Software Driver, on all operating systems, and if possible, NIC Firmware. Then on Windows 2k/XP machines, the autosense link speed setting is slightly faulty, so if u know your NIC is good, and your switch/hub is good, and you've tested the Cat5 Cable, then set the link speed to 100Mps Full Duplex, manually. The Win9x machines may also be having a conflict with Windows XP's Quality of Service (QoS) Protcol, thus lowering link speed. You can disable this protcol on WinXP, without casuing any hassles.

Good Luck

by eddyb

Did you check the NICs? Do you have any that are 10MBps only?
How about the drivers for the NICS? In configuring them, did they have an option to chose what speed they would support?
How are these connected?
Are any of them connected with Cross-Over CAT5 cables? They are limited to 10MBps.

by danp8947

EddyB,

Why do you say Cross-Over CAT5 cables are limited to 10Mhz?

Does CAT5 supports 100Mhz and I have been using a Cross-Over cable at 100Mhz for years.

by scootr64

check the properties of your network card in device manager. go to the advanced tab and see if it is on autosense, 10mb, or 100mb. if the card has the capability to do 100mb, select that as the default. It may be a 10mb card. If the machine is old enough that it is running 98, chances are it is only a 10mb capable card.

by poppy

I have a home network with two xp machines and two W98's. One of the XP's is the ICS server. For some reason when a user logs on with lesser privileges on the two XP's the internet drags dramatically, like it just won't load pages for minutes and then they will appear later. It's like IE just freezes up and then some time later it starts working again. It does not happen when logged in as admin on either computer. The w98's have no trouble at all. How can I fix this? Anyone else have this problem? I have deleted and added profiles, even increased rights. Only profiles created with all rights from the start work properly. This obviously poses a security problem.

by scootr64

I would suggest purchasing a SOHO router/5 port... they are fairly cheap and would resolve the problem of having to deal with ICS (which sucks anyway). You could pick one up for aroud $60... wireless ones will run a tad more, but,then you would haveto buy wireless nic's too.

by dick909

Im having a problem with manually using windows update whenever I go there and click on scan it scans to 100% fast and dosent show anything. Ive tried MS solution to the problem, but still nothing works only thing I can use is automatic update. Any comments would be appreciated!!

by yammiman

I had trouble like this until I upgraded to IE 6 with the latest service packs. Actually, it worked OK with 5.5 SP2, as well.

Also, you might check the advanced settings of IE and choose to allow ActiveX scripts to run.

by guyker2509

I've had the same problem a few months ago. In fact, nothing was wrong with my machine or XP. The problem was due to the automatic connection script of my Internet (cable) provider (Telenet in Belgium) which seemed to be incompatible with Windows Update running on XP (don't ask me why !). The first (temporary) solution was to disable it (in IE : Tools / Internet Options / Connections / LAN settings). The only caveat was that it was impossible then to share the connection (with ICS). So I only disabled it when it was necessary to update the PC that was sharing the Internet connection and re-enabled immediately afterwards (of course, it was impossible to update the other computers). A few weeks later, the ISP adapted his connection script and now everything is working perfectly.

Maybe you could contact your ISP and them if they know about the problem.

by joshwithers

Firstly, Upgrade to Internet Explorer 6 Service Pack 1, set all Security Settings, and application settings to default.

Then make sure your proxy server is set correctly on the right protocols (check with isp)

Then if you have a firewall installed, add windowsupdate.com to the Trusted sites list.

And if all else fails, Get a shareware program called Xfig, System Utility for tweaking etc, but theres an option there to "Register this PC with Windows Update", its a minor MS rego thing, but may help.

And btw, Windows XP comes preloaded with Inrternet Explorer 6, so IE 5.5 is not an issue.

Good Luck

by janl44

I had the same problem and much to my embarrasment I just happened to look at the date and I had moved it forward to check out an appointment and had left it there. The date and time clock of your computer must be correct.

by rosslettau

I don't know if anyone has responded to you yet dick, but here goes.....

Sometimes, with different networks and ISP's, you need to add the following site to the trusted sites in internet explorer:
http://v4.windowsupdate.microsoft.com/en/default.asp

You can get to the trusted sites by the following in internet explorer:
Tools-> internet options -> Security -> Trusted Sites

Hope this helps....

by fxef

On a home network using a Cable/DSL router, a network bridge has been installed on one of the XP boxes. The bridge change the IP to 169.xxx.xxx.xx. It also played havoc with Outlook connecting to the mail server. After several hours of working with this issue, I have the box back online but can not delete the Network Bridge. Error states that Network Bridge is not configured properly. I now have it disabled and no protocols installed.

Any ideas how get rid of the Network Bridge?

by guyker2509

You can disable it by using REGEDIT and creating an new DWORD key called DisableForwarding in the following branch of the registry : HKLM\SYSTEM\CurrentControlSet\Services\BridgeMP
Assign it the value 1. Restart the PC for the change to take effect.

by dr.red

According to Michael Meyers, a win9x or later OS that is configured for DHCP but unable to access a DHCP server will always default to a special IP address starting with 169.254. If this happens it is likely that there was an IP address conflict onyour small system. This special IP address can be assigned when either static or dynamic IP addresses are assigned. I saw this happen on a network where two PCs accidentally had the same IP address statically assigned. Hope this helps.

by randyluther

Load the IPX/SPX/Netbios for Microsoft and ensure that the TCP/IP Protocol is loaded. TCP/IP will be used for the Cable/DSL connection. The IPX/SPX/Netbios for Microsoft will be used for your file and print sharing. As long as the NIC is present andworking with the above in place you should be able to delete or at least disable the bridge.

by olsenbanden2

Had Aut. update set but for the last few days there's an update waiting to be installed. I let it install, but the next time I start the computer up it's there again same updates. I've disabled the Aut. update to no avail. I've went in and installed it manualy. Same problem.
Is there any way to get that to stop.

by dirt burner

Try deleting the temp file directories created by Windows Update. C:\WUTemp, just delete the directory. Then go to C:\Program Files\WindowsUpdate\V4 and delete the Temp folder. Then access the update site again.

by kc8avv

I recently uninstaaled easy cd creator platinum 5.0 and it screwed up my windows 2000 pro. I got the blue screen of death, and thanks that I had Linux 8.0 I switched over and began trouble shooting. I created boot disks from my windows 2000 install cd (could not find my previous copy) in Linux and rebooted and had to reinstall after failed repair. I now have to reformat and rebuild my software ensamble.

By the way use Nero burning ROM!!!!! It is better.

by wmanson

There is a problem which corrupts the cryptographic service during a system restore. Quite a few users have experienced the non-installation of Windows critical fixes 810833 and 329170 as a result.

To fix the cryptographic service:

1. Click Start, and then click Run.
2. In the Open box, type cmd, and then click OK.
3. At the command prompt, type the following commands, pressing ENTER after each line:
net stop cryptsvc
ren %systemroot%\system32\catroot2 oldcatroot2
net start cryptsvc
4. Type EXIT to close the command prompt. Install the critical updates again.

by skooboy

Mapped drives I create in WinXP never hold to
the next session. In other words, I create a
mapped drive, power-off, and when I power
back on, the mapped drive must be
re-established. Does anyone have a solution
for retaining mapped drives on XP?
Thank you.

by rodge

Try opening a command prompt and type the command "net use \\servername\foldername /persistent:yes".

by dirt burner

Check the Windows Update Site. I believe there is a Mapped Drive update that addresses problems such as this.

by al

Take a look at Ms article Q138365. This did now work for me, but when I appied this registry patch to the XP client workstation, it fixed the problem. Once gorcha: In XP, change the registry value to 0xfffffff (7 Fs).

Good luck!

Dave

by skooboy

Hey thanks, I'm going to try the above fix. I did previously use the NET USE command, to no avail. I also created LMHosts & Hosts entries. All to no avail! Thanks for your ideas.

by pscooter

Better still create a new shortcut on the desktop and copy devmgmt.msc into the location field and presto you now have the shortcut on your desktop

by rosslettau

Or if you don't want to have a shortcut on the desktop, simply right-click on my computer, and select manage... device manager is there. 8-)

by devisonr

As you all know there is always more than one way to do things in the Microsoft environment. This particular example is one that I use all the time mainly for speed sake.

by james wise

We are planning to deploy XP to 600 desktops on our corporate network. Does any one have an idea how to best tune XP for faster boot times and logons? I know that certain utilities speed up the boot process..

by thechas

Download and run the bootvis utility from Microsoft.

This utility can help you identify excess delays in the boot process, and make adjustments to speed up the boot process.

Tweak UI for XP is also worthwhile.

Search the TR article archivesfor the XP articles, there are a number of articles covering tweaks and migration issues.

A good general purpose site is www.onecomputerguy.com

Also, www.aumha.org

Chas

by niklaseri

My first thougt is as for the logon time You have to consider how much traffic during logon hours and than have enough DC:s available to handle the logon process for all clients. When it comes to boot times I don?t know any utility but maybe there are some services that You don?t need so You can turn them off and that will impact the preformence on thev boot process.

by been there

The first time I did a Defrag it took forever. The next time it took almost forever. If your going to install Win XP ! would say 1st. set it up, then install the service pack SP1 and all security upgrades. Everything will run much faster especially Defrag.
Organized files are a must. I dont know about doing all those computers and how to set them all up at the same time but that's another issue.

by joshwithers

for as little problems as possible (800 machines, u can spare 5 seconds at loadup for the sake of stabilty right?)

use windows update, disable which ever services u'r comapny will be using (wi-fi etc), apply service packs, but the biggest hurdle in windows xp performance is hardware, and registry related settings, such as buffers etc

updated drivers improve performance greatly, and if need be, disable the pretty looks, and take back to the "Windows Classic" theme, a bit quicker, but not as quick as the Windows XP theme

I like pretty, but its personal i guess.

Any questions, email me, I've done many a windows xp rollout

and Good Luck

by town_drunk

MS actually have a deployment guide and a lot of other useful information regarding corporate deployment, have a look on Technet.

I wouldn't be using 3rd party apps, I'd be looking at shutting down services that aren't required and disabling things like fast user switching.

by webguybob

Fellow techies,

I have just installed XP Home, at home. One of the first things I noticed is that when I now dial up to ISP, there is a constant stream of incoming packets over my connection. And, this is to the tune of ~20% of my bandwidth...let's say about 7 MB worth in one hour's time.

I've tried sorting all of my files by latest time stamp and size and it appears that my XP firewall log is just about the only thing that's being constantly updated...other than the typical log files.How can I find out where this data is being written...or if it is being written at this pace?

Here are some facts:
- I have disabled Auto-update service
- I have disabled McAfee and it's update service
- I have disabled MSN/IM's Auto-update
- There are no other Winsock-capable programs installed

TIA,

Bob

by etillisch

Bob,

Have you applied the service pack for XP? I believe there was a fault with the firewall that was fixed with SP1. The other issue is when was the last time you update McAffe and ran a full scan? It sounds like you might have picked up an illicit server which might be transmitting info to a hacker.

Just 2 ideas,
Erik

by joshwithers

Get some spyware removal software running, as well as an Updated Anitvirus!!!

Also, try no to use Windows Built-in firewll if u can, use my fav, Norton, or if you're on the cheap, Tiny Personal Firewall.

Also something i remember from wth win9x days, is a prog called loadqm.exe, a ms app, that apparently contact microsoft servers, for messaging reasons, not sure.

Good Luck

by horsfall

I had a similar problem but a far higher stream both incoming and outgoing traffic(6 gigabytes in one month) that was caused by a trojan horse virus. Norton Antivirus eventually found the file that was causing all the trouble(system.exe) but couldnt delete it because it was active when the computer was on. I had to change it's name, reboot and then delete it to get rid of it.

by dj_jewel50

Hi

This might as well bethe problem. It comes from winxpnews:

"Windows XP Professional has a feature built into it called QOS (Quality of Service). This feature allows the operating system to optimize bandwidth allocation for different services. While books are filled with incomprehensible information on this subject, what you need to know is that this feature actually throttles back your available bandwidth. QOS reserves 20% of the available bandwidth on any connection for itself. This means you can't use it for downloads and LAN connections! You can cut the QOS brick tied to the back of your network connection by performing the following steps:

Click Start and then click the Run command.
In the Run dialog box, type gpedit.mscin the Open text box. Click OK.
In the Group Policy window, expand Computer Configuration, and then expand Administrative Templates. Expand Network and click on QOS Packet Scheduler.
Double click on the Limit reservable bandwidth entry in the right pane.
Select the Enabled option and then type 0 in the Bandwidth limit (%) text box. Click Apply and then click OK.
Close the Group Policy window and restart the computer (not sure if you need to restart the computer, but do it anyhow).QOS isenabled by default on all adapters. If you disabled it for some reason, make sure it is enabled, or else it's possible that the 20% limitation will be enforced anyhow. "

Hope it helps

by dj_jewel50

I posted the previous message and realized after the solution is for Win XP Pro. I'll try to find a "home" solution

by arnaud

I have my network access: Sharing and security model for local accounts, set to classic (win2000 style) In passing this is on my home desktop. I have also enabled everyone permissions to apply to anoymous users, all this to be able to share folders in the same way as I used to do it on win 2000. Everything works great, however, I get success audits for Guest logons and logoffs in my security log even when I don't use the guest account or even use my shares. I do have a small home network but I'm the only one that uses it, do you think some harmless fellow is accessing my shares over the net ?

by support#netropole.com

It?s possible some one is access your shares. You may want to audit your shared folders. Then check the times of access to those folders. The other possibility is that by allowing anonymous user access, its using the guest account to access the shares. This is most likely the issue. But I?d still audit the shares if you?re concerned.

by joshwithers

Firstly Windows XP does help itself to network shares and other resources, supposabvbly for o/s reasons, but if you want to hear the conspiracy theory click here, http://www.hevanet.com/peace/microsoft.htm, not so much a conspiracy theory but a technical up-yours to microsoft.

The other thing to look at is whether or not you have file and print sharing enabled on the outside internet connection. Thats the first line of defense, if not,and u have "Everyone" access on all your shares, my grandpa could access your shares through his cable tv decoder box :-). Secondly get some firewall software running, such as Tiny Personal firewall, or whatever your favourite is, min being Norton Internet Security. Amd Thirdly, Use Windows Update regulary, on all Windows 98SE, and up PC's.

This Keeps your windows components up to date, this includes your internet explorer, email client, tcp/ip stack, and network connections, keep in mind that windows dosen't care whether a networ connection comes over a network cable or a modem, so u have to regulate it.

Good luck

by frank_s

I have the Guest account disabled on all three of the PC's on my home network and have no problem sharing folders and printers between them.

If you are using an "always on" internet connection like cable or DSL you really need to have a softwareand hardware firewall (or at least one or the other) or you're just asking for trouble.

by arnaud

I don't know why my user name was deleted, maybe they didn't like my email addy, changed my alias.

What I realized directly after I posted my question was that someone accessing my shares is not a possible explination. I have a hardware firewall on which all WAN requests were set to be blocked.

Frank_S wrote: to disable the Guest account, this would work although I wanted to avoid doing that.

JoshWithers wrote: that Windows helps itself to shares, I suspected this might be a reason, thanks for the great URL Josh.

by ___._

C:\ would just be a top level index, much like a contents page in a book, the c:\xxxxx would be a chapter index on xxxxx. So the computer would search the contents index, then the chapter index once found.

The reason Documents and Settings is there, well this is the most commonly used part of the files store, for user profiles.

by swallen

I have Win XP Pro on the PC I use at home. I've created two accounts for my kids. I would really prefer they NOT have Administrator rights.

However, I now have two games "Harry Potter" & "SIMS Deluxe" that won't work correctly unless the loggedin user is an Administrator.

Any ideas on how to handle this?

Scott W. Allen

by arnaud

What usually works for me although not in all cases, is to change the permissions on the game folder itself.
You might have to change your sharing and security model for local accounts settings.

by swallen

Thanks for the suggestion. I'll look into to it. But I think the problem is the applications are trying to write to the registry. It's not a problem with access to the folder.

by dac-bobbyii

I have ran into a similar problem with an SQL database that I run at work. My users are required to have "admin" access to the program so the program can "write" to the drive when necessary.

What I did to accomplish this without giving my end-users full rights, was to give them "full control" over the individual folder(s) that the program is located in. To do this, you have to remove the "simple file sharing" on XP Professional so you can assign NTFS permissions per folder/file, etc.

You might try this with your games. Give your children "full control" rights to the folders where the individual games are located (ie: c:\program files\id\doom) but no place else.

Hope this helps......Bobby

by jgolden

I have not found an answer to that one , but found out when I was logged in on a profile that had Admin rights I was able to change that id to a limited account??? this is a bug and you have to download sp1, now if you dont have admin password you are locked out of system.

Goldenj1@prodigy.net

by gvoyager

Although I don't know much about the usual requirements for games, the most likely problem is security access restrictions to the program. Perhaps the game requires write and modify access to the program directory. If so, you might be able to grantsufficient access by making the kids' accounts members of the "power users" group. If that proves insufficient, (for the next step)you could modify the security settings for the games' folders by specifically granting write and modify rights for thekids' logon names.

by eallen

1st uninstall the game , then browse the cd for the setup file. rt click and use the "RUN AS" option.this should allow you to install it as any user you prefer.

by patrbyl

when logged on as Administrator in explorer give access rights to the other log-on accounts for the folders that contain the games in question (include all sub-folders)

Pat

by allgeek2me

The games may have been installed using an admin account. Try uninstalling the games as admin, then log in under one of the other users and install the game. This could change the rights.

Just my $0.02

by sumanium

hasntaclu mentioned about this method.
when installing from the user account, u also provide the administrator account password, but only until here. when playing, u don't need the admin account pswrd.

by skooboy

Any input is much appreciated...
Among my 3 LANS, only 1 XP Pro PC has other networked PC's (Win9x, W2k, XP) appearing in its browse list ("Networked Computers"). On the other XP's not seeing the network, I have adjusted the Hosts & LMHosts files, confirmed the presence of a master browser (on my W2k servers), and tried every Netbios setting. Worse still, there is nothing different on the 1 good network-participating XP Pro PC. I don't yet have ADS, just a peer-to-peer network. Any suggestions to make my other XP Pro's see the network? PS: network connectivity is good, I can connect to any PC via UNC address.

by frank_s

You say your network is only peer to peer, I assume that means there is no domain. I know this is basic, and don't mean to insult your intelligence, but have you created a workgroup and added all the pc's to it?

by skooboy

You've hit on something simple I may've
overlooked. I never actively created a
Workgroup, I just went with the "workgroup"
that's naturally created when one doesn't
create a domain. I'm going to implement ADS
this coming summer, but until then, I'd
appreciate an elaboration on what you mean
by "creating a workgroup and adding everyone
to it". Network Neighborhood on my Win 9x
PC's are fully populated and are members of
the default workgroup. I think I'm missing
something regarding creating & assiging
computers to the "workgroup" for the XP's.

by shajiv0810

This is an excellent site for any Microsoft related problems and support!

support.microsoft.com

(just give your exact error message)

Thank you.

by kalell

If you haven't already, add the NWLink IPX/SPX/NetBIOS Compatible Transport Protocol. Also, you may have to share at least one folder on each pc. On my XP peer to peer, I have 4 pc's that had the same scenario until I did the above. Once done, the could all see each other and all shared printers. In some cases, you may even have to use static ip addressing for it to kick in.

by jose_12650

Please check if the IP address of all the systems are in the same subnet range, i.e., 192.168.0.1, 192.168.0.2, 192.168.0.3.

Or try removing the hosts and LMHost Files. Allow the computer to assign themselves its IP Address under the APIPA on restart. NOrmally, the systems would get a private IP address range beginning at 169.254.x.x. Create an identical workgroup for the three systems. To be able to browse the folders of one system from the user of the other network computers, you should create a local user account of that user to the system it wanted to access and vice versa.

by skooboy

Yes, they're all on the same subnet. I at least
have the subnets/LANS correctly designed,
thank goodness. They get their
DHCP-assinged IP address from a Cisco
router. Like I said, connecting via UNC
address works fine, I just can't get the
simplicity of Win 9x from these XP machines.
Thanks.

by tomsal

Well, I'm no going to explain theory or scientific reasoning here, but yup you can definitely do 100Mbs with a cross over.

Unless my equipment is bad (that would really not make me feel good because its much more expensive than the cable), I'm reading 98 Mbs over my crossover.

PS. I don't recall ever hearing that they were limited to 10Mbs either.

Just my 2 cents.

by storme

I recently installed Windows XP Pro on my home computer and had no problems since then. Except for certain games I'd like to install and play. I came across a problem trying to play Quake 2 online through Gamespy, and I was told there was supposedto be a patch with a certain XP fix, but I doubted the patch fixed the issue in the game. I tried the Compatibility Wizard. The game itself is fine, but I just can't play Quake 2 online. I had no problem playing America's Army.

Does anyone have suggestions how to fix this particular problem?

by swallen

Which user account? There are several who I wish to remain non-admins, but to be able to use the applications?

by frank_s

Creating a workgroup is simple: pick a name for the workgroup (I'm still using the unimaginative name of 1A for a workgroup name. It was for my first network experiment which was for a mix of Win 3.1 for Workgroups and Win 95 computers).

Pick one of the computers and tell it it's in the workgroup name you created and then tell the other PC's they're in that workgroup. For Win XP (and 2000, I believe, but I don't have one to look at right now) right click on "My Computer", click on "Properties" and then click on the "Computer name" tab. In that dialog box, click on the "Change" button along side the line that reads "To rename this computer or join a domain, click change." In that dialog box, click on the "Workgroup" radio button and type the name in the box. For the Win 9x computers (this is from memory, but I think it's right) open Control Panel and double click on "Network", then click on the "Identification" tab and then type your workgroup name in the box provided.

Hopefully then, when you go to My Computer and look in My Network Places (that would be on the XP PC) you'll see the workgroup listed and all the computers will be in the workgroup.