XPert discourse
This is page 2 of the discussion. Read the opening post
IT Employment
This is page 2 of the discussion. Read the opening post
by skooboy
Yes, the XP PC's are participating on the the
subnet. They get IP addresses from the
DHCP server, connect to anything via UNC
address from the command line; just no
appearance of other computers in Computers
Near Me or Networked Computers. I've tried
your suggestions, thanks. Still no go,
however. I think I'll give up on this until I can
create ADS.
by ving
1) Try a different NIC card. If you have no loose ones, temporarily use one from another XP machine that is on the network. Lacking another XP machine, use any working networked machine's NIC. Just be sure it isn't to old and not supported by XP.
2) Try Norton's Ghost app to copy a working machine to the non-working machine. This might require changing sound, video and other setting if the two machine are not the same.
by bsinnott
by webguybob
Fellow techies,
I have yet to receive a resolution from the Technical Q & A, so I thought I'd try a single repost in this forum. Any help would be greatly appreciated...
I have just completed a fresh/clean install of XP Home, at home. One ofthe first things I noticed is that when I dial up to my ISP, there is a constant stream of incoming packets over my connection. And, this is to the tune of ~20% of my bandwidth...let's say about 7 MB worth in one hour's time.
I've tried sorting all of my files by latest time stamp and size and it appears that my XP firewall log is just about the only thing that's being constantly updated...other than the typical log files. However, the log file is not growing in proportion to the incoming Kbs. How can I find out where this data is being written...or if it is actually being written to the HD?
Here are some facts:
- I tried disabling XP Auto-update service
- I tried disabling McAfee and it's update service
- I tried disabling Windows Messenger's Auto-update
- There are no other Winsock-enabled programs running
Despite all of the above, the same amount of incoming traffic is occuring. Before I go to my ISP and file an abuse report, I'd like to have my cyber-ducks in a row. As mentioned, any help would be appreciated.
TIA,
Bob
by theburbs
I recently read the e-newlsetter describing the autmatic shutdown features of WinXP. I don't see how to sonfigure this in WinXP Pro. Is there a way to have WinXP Pro trigger a hardware sutdown?
When I was dool-booting in ME or XP Pro, the ME side would shutdown, but Pro has never. Is there something that must be set in CMOS or WinXP to enable this?
- Jay
by theburbs
First - If I read what I typed, I would have corrected "dool" - English is a second language for most Americans ;-)
Second - the question isn't so much how to shutdown, rather how to have the OS power down the hardware. This, rather than leave you at the "It is now safe..." screen. Windows ME was able to shut down this machine, when I was _dual_ booting. But I have finally got my kids used to XP, and stripped out the ME partition. I would like to have the powerdown feature.
by theburbs
The answer was found on a more productive site.... Simply, there is an "enable" checkbox in the APM section of the Power options. This was not selected (by default?)
Do I get points for answering my own questions?
by ___._
Sounds like a problem with the driver for your modem / internet connection. The API's for XP must not be compatiable with the Quake comms engine.
Look for other drivers!!
by raymond w.
Having rebuilt my XP machine twice now, I can confirm that for my 98/XP network the one XP machine needs the 2000 NETBUI files (Nbf.sys to \Windows\System32\Drivers folder and
Netnbf.inf to \Windows\Inf folder) in order to work. If you have usedthe XP ones it needs to be deleted and reinstalled after getting those files.
And yes I did try all the other methods listed in the various threads related to this one, so this may just have the final thing needed to be done.
I suspect that M$ is trying to force people to buy upgrades to older machines with crippled interoperability, but then I may just be paranoid....
by jcdshs
Well done TheBurbs :-)
I was just browsing and saw your posts and they have answered a problem for me, too.
Many thanks for your efforts.
by johnforrest
by jo.case
by moira
>> Just Press Windows/Break to get to device manager
That brings up System Properties, you still have to navigate to Device Manager.
I have a shortcut for Device Manager on the desktop (apologies if this has already been posted, I hadn't time to read *every* reply).
Make a new desktop shortcut and type this in the path to the target:
%windir%\system32\devmgmt.msc
Then just double click and you get device manager straight away.
by scld_flipper
by kendbeeman
Just create a new folder for all games to be installed. Create the folder on the root of C:
If this doesn't work, create a group with their accounts in it and give full control on the root folder. Or, as stated above, try giving the accounts "power user" rights on the folder.
You also maybe able to be "creative" using a policy file.
by nelsond
You'll definitely want to check out the Application Compatibility Toolkit.
You can find it on the Windows XP Professional CD in the /Support/Tools folder. To install it, just run the Act20.exe file.
The AppVerifier tool features a very user-friendly interface that makes it easy for you to test applications. Follow these steps:
Open the AppVerifier tool by going to Start | Programs | Application Compatibility Toolkit | AppVerifier.
Click the Add button.
In the Add Application dialog box, select the application you want to test, and click OK.
In the Test Settings section, select which tests you want to perform, and click the Run button.
Use the selected application as you normally would.
by ustek
If a hub or network switch do not support FD
you'll be in trouble!
do it automatic
by ustek
support speed over cable speccification.
CAT3 may give you 200Mb/s
Cat5 easily 1Gb/s
It depends on many factors
by ustek
by ustek
It must be disabled by default
!
I work for a non-profit agency that STILL uses a database program that was written for Win 3.1. Not all the functionality was available until I changed my settings to Windows Classic and changed my taskbar settings to Classic Start menu. This *may* help...
By the way technical support isn't always given workarounds if a)a newer version is available, and/or b)the program was written for an OS that has gone through that many updates, and/or c)the OS is essentially different than the one for which it was written. Win 3.x is exceedingly different than NT and XP.
by bobho
by liriom
Device Manager is located in the C:\WINDOWS\SYSTEM32 folder
the file name is DEVMGMT.MSC
simply right click this file and Send To -> Desktop.
This will create a shortcut for you
by vanborine
by paulr323
by moira
Why the ? before and after 'mmc'?
Obviously that's not going to run anything .....
by jo.case
by moira
by ccovington
this is a great tip, i tried this and it works of course. one thing though, u have to have the start menu as the default style, can't be classic
style
by ccovington
the two sites that were given already have great tips u could also reference to this one
http://www.xptuneup.com/tip0025.htm#marker11
most of the fine tuning will be done through the registry, make sure u back it up first
by bgrayhek
by moira
That will put a shortcut on the desktop to Computer Management, not Device Manager.
Go through the create new shortcut wizard and in the target put
%windir%\system32\devmgmt.msc
to get a shortcut to device manager on the desktop.
by seconnaught
by your mom 2.0
Create a .bat with these lines, and save it on the desktop:
@Echo Off
Prompt $p$g
set DEVMGR_SHOW_NONPRESENT_DEVICES=1
start devmgmt.msc
exit
by phil
Right Click My Computer
Manage
Device Manager
It is pretty quick, plus almost everything is in there (event log, users, disk manager, services,etc). I wish local security policy was there as well.
by karthik40
I have zonealarm personal firewall free edition on my laptop which has built in Intel 2200b/g and rinnign xp sp2. My problem is I keep my laptop always on and for security reasons I disable wirelss radio by pressing Function+F2 key but after sometime when I re-enable it it not able to connect to my wireless internet profile.I tried to FLUSh DNS cache and diabled firewall and also tried to reconnect to my profile or for that fact even some other profile I still cannot connect to the internet. But when I restart my laptop it automatically connects to my wireless profile. Why is this happening and how can I fix it?. Help is appreciated.
Thanks.
This discussion is closed to new replies.
Sort by Trending