9 replies
by mak15
I guess you probably connected your computer by hub, and nothing else. Is your printer directly connect to the hub? I guess you don't have server in your environment, right? If you do, you can buy a printer server, connect to your printer, then to the hub and set it up in the server. Otherwise, from what I known, you only can use printer sharing function, which the computer connected directly with printer must turn on.
Hope this help!
-Mak
by mikel~t
What type of printer do you have? You mentioned that it is connected to your router, so it must have a network card: have you assigned an ip to the printer? I assume since you are using DSL that you are using tcp/ip as your main protocol. if one of your computers is a NT server, you can create a print device and that should resolve the cross platform printing problems.
if not, try to check the faq site of your printer manufacturere and see if there is any special firmware or software upgrade required.
hope this helps.
Mike
by nchapman
Knowing what kind of printer you have
and how it is connected, and what kind of
router and how the network is set-up is
crucial.
One thing I can definitely tell you without
knowing any of that is that if you have a
Windows printer connected to one of the
Windows machine you are probably out of
luck.
If you have a networked printer, and it and
all the computers are on a hub, it may be
doable. You may have to use the Apple
desktop printer utility and access the
printer by its IP number.
I recently saw a new Asante Router/Hub
that included a print-server, which would
certainly allow you to use a Windows
network printer, but would require you to
buy a new piece of hardware (albeit one
that's a steal at$179).
by pmescomptech
It sounds to me like you need to start over
from the top. First of all someone else
was right if the printer is directly
connected to a computer you are out of
luck. However if you are using a mac with
the USB Printer Sharing feature there
might be a possibility that the PCs can
see the printer over the network. Your
best bet is to use a print server that is
compatible with both platforms or print
server software such as is found in
AppleShare IP 6.3 that will allow both
platforms to see the printer. Be sure and
enable TCP/IP print services.
This discussion is closed to new replies.
Trending Mac OS posts
Sort by Trending