1 reply
by oh smeg Accepted solution
As the HAL Layer is different as well as phyisical Positioning in the Drive Array line will be what the problem here is.
If your new unit has a SATA Drive and the old drive is IDE then by default all IDE Drives are considered by the BIOS as Boot Drives.
If they are both SATA then the new drive should be at the other end of the SATA drive numbers as it will be being read with it's Boot Sector intact and the unit is tieing itself in knots trying to boot off both drives and finding that it can not.
Even if it is well away from the Primary drive it still has an Active Boot Sector on it so it will cause issues that may not be possible to overcome particuarly when new M'Boards have the BIOS which looks for active Boot Sectors for OS, if that's the case you'll have to delete the Active Boot Sector on the Old Drive or try dual booting the system with both OS's intact and chosing which one you want to boot from when the system first pasts the POST.
This discussion is closed to new replies.
Trending Storage posts
Sort by Trending