Question Locked

Can't boot a bootable disk on my Toshiba Satellite Pro A205-S5000

0 helpful
26 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to install XP onto my Toshiba Satellite Pro system but it will boot then and before you get to the setup it says doesn't have enough information but I make sure all my disk are clean and use the lowest burning speed when burning windows CDs or DVDs can someone please suggest something or help me out.
Thanks

26 replies

by older mycroft

Have you tried using this disc in another computer ?

What exactly do you mean by [i]"it will boot then and before you get to the setup it says doesn't have enough information"[/i] ?

Are you saying that the Boot Disc actually [b]DOES[/b] boot, but that the install procedure then fails ? What is the actual error message ?

by shawnstoebe2009

Yes it actually boots then wont go through with the install and I have tried like 10-13 times

by thumbsup2

We can't see the screen. You need to tell us what the error message says.

by shawnstoebe2009

I copy all of my CDs and most of the cds I get someone how get dirty and scratched up. Sorry I ment to say Vista I'll change that

by seanferd

If it came with a system (OEM), you can only install it on the system it came with.

Also, try using the original DVD.

by shawnstoebe2009

Its Windows Vista Ultimate. It came with Windows Vista Home Premium so I wanted to get Ultimate to put on this system

by older mycroft

First off you post that the XP disc can't boot, but it turns out it CAN boot but then the install fails.

Then it turns out you're not installing XP but Vista - [i]which is a difference of a CD and a DVD[/i].

Now you're saying that you're using a copy disc, but all your discs somehow get 'scratched up'.

[b]So, if the disc (original or copy) is all scratched up, isn't that the most likely cause of your problem ?[/b]

Also, Vista (on a DVD) doesn't fit on a CD, yet you keep talking about CDs. Have you made a copy of Vista onto a CD? Scratched or not, it won't work.

by shawnstoebe2009

Here I'll get you all unconfused. the CDs or DVDs all end up getting scratched, so before they do get scratched I back them up and put them safely in my DVD case. And yes its a Vista im trying to install on this system. Yes it boots then gets to like 89 percent and says there is a important file missing

by captbilly1eye

... Do your parents know you are using pirated software?

No one here is being fooled.
I recommend you go elsewhere.

for future reference, being a student in school is not the same as having a Job Role in Education.

by shawnstoebe2009

For 1 I am 18 living on my own.
2 they are not pirated and if they were its not illegal people put them up for someone to download not like im going into wherever and stealing them. Also my parents do it but I don't. So you know I copy all the software I get so if it gets all scratched up I still have something else to use

by older mycroft

So unless you are living in the middle of a desert, how in hell can this install disc, which only ever gets used when you are installing, be 'all scratched up'?

Out of ALL the discs you have in your possession, the install disc might NEVER see the light of day.

Where are all the scratches coming from, eh?

by thumbsup2

... is the one located on the original DVD. That important file can not be copied. This makes the copies of an install disk useless to try and put on any system. It's called Copyright Protection.

Always use the original for any clean install. I'll bet your problems go away.

by shawnstoebe2009

That can't be it cause I did the same exact DVD on my desktop and it worked perfectly fine

by thumbsup2

... it is illegal to install the product using the same license key on another computer. THAT is Piracy.

by shawnstoebe2009

At the store im not that stupid. I buy atleast 2 every year cause I always upgrade my computer so they need new OS software

by older mycroft

At the point of the install error, the install routine doesn't crash, does it?

So, instead of scrapping the attempt and re-installing all over again ~ LEAVE THE INSTALL SITTING WITH THE ERROR BOX ON THE SCREEN ~ eject the DVD and go wash it.

Wet it under a tap then squirt some common or garden dish-washing detergent onto it and soap it up with your CLEAN hands. Rinse it off under cold water [b]DO NOT HOLD IT UNDER HOT WATER[/b].

Dry off the disc with a bathroom towel (or a clean t-shirt) and put the DVD back in the drive. Click the OK button on the ERROR BOX and [b]WAIT![/b]

With luck the install routine will find the missing file and move on.

If the error happens again - REPEAT the process.

[i][u]For future reference:[/u]

An install routine that appears to fail at 89% does not deserve a Post with a title that contains the words[/i] [b]Can't boot a bootable disc[/b]'.

;)

by shawnstoebe2009

I have cleaned it a good 10 times and it still wont load all the way and im sorry I didn't know what else to name it

by thumbsup2

.... Install disks are copyrighted materials and it's illegal to share them with friends.

by shawnstoebe2009

They slipstream them for me... ask questions before you assume makes the world better place

by shawnstoebe2009

Riot you faggot im sorry that I can speak total geek. Maybe if you cant help then don't reply its ok if you can't

by thumbsup2

... is the DVD you are attempting to use is NOT an exact copy of the original... it was slipstreamed for you 'by a friend' and this slipstreamed DVD will not install because an important file is missing. Did I get that right?

The solution is pretty obvious, isn't it? Either the slipstream process burped, or your friend has slipstreamed the WRONG version.

Use the original to do your install and quit giving your DVD's to other people who scratch them for you. Obviously, their equipment isn't up to par. Some equipment is more sensitive than others.

This discussion is closed to new replies.