4 replies
by mrafrohead
by compshop
I've just spent the last several days (and long sleepless nights) working on an extreme system crash. One of the biggest problems I had was a machine without a FDD. There are many different configurations out there to create a boot CD, but for a comprehensive education and toolset, go visit the Ultimate Boot CD for Windows at
http://www.windowsubcd.com/index.htm
Also visit Bart Lagerweij's most excellent site at http://www.nu2.nu/bootcd Bart has spent years compiling tons of information, procedures and tools to create a boot cd (and many other goodies) for nearly anything.
Both sites are informative and offer a ton of material, tools, well-written procedures and just about everything you could ask for on the subject.
Be careful: Once you get started on this path, you'll get hooked. It's fun to experiment and see what you can create. I've lost about 3 nights sleep now, mostly because of the ton of stuff to learn and do. It's been fun, but try to get some sleep. And be sure to have fun.
by dbucyk
Did you change any jumpers on the motherboard to accomodate the faster CPU.
Even though newer motherboard will automatically detect the newer CPU, nonetheless, there is always at least one jumper on the motherboard that adjusts the motherboard speed.
Some other motherboards have to have the jumper for clock speed and voltage set to allow the CPU to operate.
Check these out and, if it doesn't help, then more than likely the CPU is defective because the CPU boots even before the BIOS.
I hope this is of some help.
This discussion is closed to new replies.
Trending Storage posts
Sort by Trending