Discussion Locked

Can't log on to MS Exchange Server

0 helpful
150 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is page 2 of the discussion. Read the opening post

150 replies

by shanghai sam

Well I went through all of the previous answers and rechecked all of the settings and couldn't find anything wrong. I checked the same things that the helpdesk people and the people here suggested but everything seemed to be ok. I also searched for the article "Customizing an Outlook Installation" but I have Office 2000 and it was for Office XP. Anyway it just didn't seem to apply

by justinf

Try reloading the driver for your network card. It sounds a bit like a DNS/WINS issue. Make sure you are using the DNS servers in the correct order.

by charleskin

Since there are some pretty decent troubleshooting steps already here and it seems almost every aspect of the problem has been touched on, I'll give a couple of "last gasp" ideas for you to try.
Step one: find out the IP address for the exchange server. Enter this value instead of the server name for "connect to".
Step two: (this one is a stretch) add the IP address of the exchange server to your web-browser's proxy list.
My recommndation is try step one first, then step one and two together, then if that still doesn't help try step two by itself.
I know, this is out there, but it might help.

by estvb

I'd already tried the first suggestion and it wasn't any different this time. I used the IP for "minermail.umr.edu" and got the username/password prompt instead of the normal error message, but then I can't get past that. The second suggestion didn't help at all. Maybe I just didn't do it right but all it did was not allow me to connect to the internet.

by fivemajors

Just a thought, go to another machine and export everything into a pst. Call the helpdesk and have them delete and recreate your account, assuming it is only being used for email, then import the pst back in. Go back to your pc, and test it.

by estvb

No, we got the same error messages as with my login info. I guess that means there's something wrong with my computer's settings.

by stolli

When we set up our Exchange server, we had logon problems because of our Sonic firewall and the DMZ. We replaced the appliance with a PIX and that fixed the general NT and 2000 population's problem. However, Win95 users still could not logon. It was resolved by editing the Hosts file to id the mail server. But the WEIRDEST part was that for Win95 users, I had to make a DNS entry using our local domain name and then disable it. It worked every time.

I think no matter what - the answer isin DNS\WINS and HOSTS. But start by triple checking your spelling and typing. If you didn't know what the server names were to begin with, maybe the IT staff can't spell and you just had to type what they told you. Could be...

Good luck - thisis better than a mystery novel!

by estvb

All of the settings are right as I've verified them with the settings on the campus computers. I've tried editing the hosts file with the mail server ip but it doesn't help.

by fenaikh

Hi
pls read these articles from micrsoft.

Good luck

Mohamed

***Very Important NOTE *********
After you copy the URL a space or a %20 maybe gets inserted in the URL when you paste it into your browser. Delete any spaces or such characters from the URL for the page to be loaded.

using the number of the article as QXXXXXX

http://support.microsoft.com/default.aspx?scid=kb;en-us;QXXXXXX

How to Connect over the Internet to an Exchange Server (Q152725)
Troubleshooting Startup of Windows Client Using TCP/IP (Q155048)
How to use RPCPing to test RPC Communication (Q167260)
Troubleshooting Intrasite Directory Replication (Q170334)
Troubleshooting RPC Problems for Exchange Clients (Q174701)
Using RPCPING To Troubleshoot MTA Connections (Q175496)
Exchange Client Top Support Issues and KB Articles (Q175698)
How to Test Microsoft Remote Procedure Call Performance (Q177446)
HOWTO: Troubleshoot RPC Errors (Q197814)
Troubleshooting DynamicRAS Connector (TCP/IP) (Q199971)
Troubleshooting Calendar Connector for Lotus Notes (Q222893)
List of KB Articles Explaining MTA Basic Concepts and Troubleshooting (Q247133)
troubleshooting Link Monitor When Red Arrow Is Displayed (Q252209)
The Microsoft Exchange Address Book was Unable to Log on to the Microsoft Exchange Server Computer (Q268575)
You Cannot Connect to Simple Mail Transfer Protocol Message Transfer Agent (Q297139)

by estvb

I looked at all of the articles but none of the offered much help. I tried all of the rpc troubleshooting but didn't know how to interpret the results (see my comment for 4/17/02 above).

by estvb

I found and tried out the rpingc32 program that some people suggested and got this message:

RPC Binding returned (0x6be). Could not bind using these parameters:
network address = minermail.umr.edu
endpoint = 251
UUID =
Failed to Bind onALL Protocols

If I changed the Protocol Sequence to TCPIP I got three error messages that said "RPC call raised exception 0x6ba. The server is unavailable." and got this message:

Successful RPC binding using these parameters:
network address = minermail.umr.edu
endpoint = 2256
UUID =
protocol sequence = ncacn_ip_tcp
Server Statistics:
#Calls Received at Server = 0
#Calls Initiated by Server = 0
#Packets Received at Server = 0
#Packets Initiated by Server = 0
Ping #1Failed

I have no idea what any of it means or if its usseful, please interpret!

by jodie.collins

Do you have the firewall on XP enabled? If you're sure that all your settings are correct, the MS Exchange server settings are OK and can ping the server and DNS, this points to either corruption on your machine (how well do you know your registry?), or something blocking you. The XP firewall settings are a possibility. Short of this...if all else fails, format and reinstall - it is a drastic step but, will give you a clean start.

by estvb

I don't have the firewall enabled and I'm sure all of the settings are correct. I have no problem editing the registry but I don't mess with settings I don't know anything about.

by r.alvarez

The problem is local to your computer since you are able to access it from any computers in the institute.

There are two things you need to check in your PC - TCP/IP and the MS Outlook(Office) software. We had cases were the TCP/IP stack got corrupted and couldn't access emails. We had to re install the TCP/IP protocol(Sometimes you need to reinstall the network card driver.)

You can try reinstalling MS Outlook. It could have some corrupted files that affects the name resolution of mailboxes.

by estvb

I've already tried reinstalling Outlook but it didn't help. Everything in the TCP/IP settings looks right. I wanted to remove and reinstall the tcp/ip protocol but apparently WinXP doesn't let you do that because its too important for the system.Somebody earlier suggested using another network card, it didn't help but I ended up reinstalling my card and the drivers so I know that's not the problem.

by estvb

Sorry for the late response. I tried telnetting on port 110 and put my user name and password and it seemed to work. I didn't get any errors anyway but nothing else happened.

by estvb

Sorry for the lack of response for Answer 46. I'd set the rating but went back to another unrated answer and then forgot about it. Our accounts are used for more than just email. I don't know how much trouble or how long it would take but I need to access my account for several classes.

Also, there's only a couple of weeks left of classes. I doubt that I'll go through reinstalling Windows and all my applications anytime soon, so if I can't solve the problem before school ends then I'll just close the question and see what happens next year.

by maxwell edison

The solution to your problem is somewhere within the first 50 answers.

Here's how you determine exactly which answer:

Print out this qestion and all the answers. Offer a reward of $25 - $50 to all your fellow student computer geeks (depending on the financial strength of those students). Pay the reward to anyone who can fix your problem relying ONLY on the Q&A printout that you will provide.

With a fresh set of eyes going over the suggested solutions, something is bound to stand out.

Maxwell

by estvb

Valid suggestion that just might work but I'm not yet willing to pay for a fix. Especially now that it's only a couple of weeks till the end of school and I won't be using my campus email much if at all.

by maxwell edison

The point I was attempting to make in answer 51 was that the solution IS, without question, within the dozens of answers posted on this thread. If you followed ALL of the suggestions made thus far EXACTLY as instructed, your problem would be fixed.

Therefore I can only draw one of two conclusions.

Either you don't possess the technical
wherewithal to delve into the issue to the degree necessary (which is why I made the "pay a buddy" suggestion), or you are simply wasting everyone's time.

By the way, I find it interesting that there are very few, if any, notes of thanks among the previous 51 rejections.

You're welcome.

Best of luck to you,

Maxwell

by estvb

Well I hadn't noticed that I've never thanked any of the individual answers. Rather than thank each person's answer in my response, like you seem to do, I chose to do it a couple of times in my comments. However I haven't given thanks any time recently and for that I'm sorry. I do appreciate all of the help everyone has offered. Thanks!

As for your possible conclusions, I'm sorry if you feel I've just wasted your time but I've tried everything suggested and posted a response with a reason for the rejected answer. I understand that it seems like I'm just overlooking a setting but I'm not. You already suggested in an earlier post that I go through each setting and I did. I checked my settings against the ones helpdesk said were correct and then went through each answer here. If it is a wrong setting somewhere, then it's not one that has been brought up yet. Maybe it's something in the registry?

by maxwell edison

I suppose that there could be an additional conclusion drawn from this evidence, one of which, of course, is that everyone has simply missed something. In addition, I've seen my share of those unexplainable and elusive little puzzlers, and I wouldsurmise that this is a distinct possibility in your case. When confronted with one of those, I usually weigh the consequences of following each of only two possible courses of action. One, of course, is to continue to troubleshoot, while the other is to simply wipe everything clean and start over from scratch. If I had to decide how to proceed, especially after several hours of troubleshooting with no obvious solution in sight, I would most likely choose the latter.

Nonetheless, reading intoone's intentions on a thread like this (as I touched upon in my previous answer) is probably an exercise in futility, and would most likely lead to incorrect or misguided conclusions. So to give the benefit of a doubt I'll retract my comment about you wanting to waste everyone's time and conclude that your intentions are indeed honorable, and that your problem simply one that is quite baffling and has stumped quite a few talented and well-informed professionals. (At least it has stumped this one.)

Best of luck with your future studies,

Maxwell

by shanghai sam

Thanks for the renewed opinion of my post. I realize that I should probably just do as many have suggested and just do a clean install of everything, but as we're nearing the end of the school year I find myself busier and busier with homework, projects, and the ever approaching finals. If it comes to a reinstall, and it probably will, I'll probably do it during the summer when I have plenty of free time. I want to keep the post open until then just in case (only three more weeks) and see ifany new suggestions arise (like the one below).

by athanman

Ok, here's a course of action that in my experience has worked during a predicament similar to yours:
First: Right Click on the Outlook Icon.
You will get a dialog box that says properties.
If your name does not appear before the word properties then it's very likely that we're headed in the right direction.

Next: Left click the properties button towards the middle of the dialog box.
Another dialog box will appear. It will have the heading: "Microsoft Exchange Sever"
...now for the easy part... and this should be easy especially because nothing is wrong with your account... from what you mentioned in your question...
Next: there should be two fields, the top one will say Microsoft Exchange Server: what you need to enter there is the Server Name or ID. If this is already filled in ...leave it as it is. If it isn't you can get it in two ways. You can call your university IT helpdesk or you can go to another computer on Campus and after you've logged on follow the steps above to get to this window and copy the characters there. You can the type them in here on your computer. You'd probably be better off doing this yourself from another computer on Campus.
Next: In the field that say's mailbox, you put in you name as it appears in the Outlook Address Book. Once you've entered it click the "Check Name" button next to it. (Note: You may want to check the spelling of you name in the Address Book to make sure it's properly spelled before doing this.... if it isn'tyou need to spell it exactly as it's spelled in the Address-book.)

Once you've done this... click the apply button at the buttom of the dialog box. Then click OK! Click OK again!

Now you're out of the dialog menus and all you'll ever have to do to log in is to double click on the Outlook Icon.

If this does not work let me know!

by athanman

Ok, here's a course of action that in my experience has worked during a predicament similar to yours:
First: Right Click on the Outlook Icon.
You will get a dialog box that says properties.
If your name does not appear before the word properties then it's very likely that we're headed in the right direction.

Next: Left click the properties button towards the middle of the dialog box.
Another dialog box will appear. It will have the heading: "Microsoft Exchange Sever"
...now for the easy part... and this should be easy especially because nothing is wrong with your account... from what you mentioned in your question...
Next: there should be two fields, the top one will say Microsoft Exchange Server: what you need to enter there is the Server Name or ID. If this is already filled in ...leave it as it is. If it isn't you can get it in two ways. You can call your university IT helpdesk or you can go to another computer on Campus and after you've logged on follow the steps above to get to this window and copy the characters there. You can the type them in here on your computer. You'd probably be better off doing this yourself from another computer on Campus.
Next: In the field that say's mailbox, you put in you name as it appears in the Outlook Address Book. Once you've entered it click the "Check Name" button next to it. (Note: You may want to check the spelling of you name in the Address Book to make sure it's properly spelled before doing this.... if it isn'tyou need to spell it exactly as it's spelled in the Address-book.)

Once you've done this... click the apply button at the buttom of the dialog box. Then click OK! Click OK again!

Now you're out of the dialog menus and all you'll ever have to do to log in is to double click on the Outlook Icon.

If this does not work let me know!

by shanghai sam

Well I'd deleted the Outlook icon on my desktop so I had to recreate it to follow your directions exactly. Once created I right clicked it and there was a "Properties" entry with nothing in front of it. I clicked it and, got the familiar window, and went to the Microsoft Exchange Server properties. The server name was filled in and is correct. According to the helpdesk I'm supposed to have my user id as the mailbox but I tried your suggestion. I put my name as it appears on the campus computers and the address book, "Last, First (UMR-Students)". I then clicked Check Name but I got the usual error message, "The name could not be resolved. The Microsoft Exchange Address Book was unable to log on to the Microsoft Exchange Server computer. Contact your..." I tried putting other stuff for the mailbox name and it doesn't seem to matter, I always get the same error.

by lordinfidel

Do you have a personal firewall installed on your system?

If you can not resolve the name using the properties resolve button then several things are happening.

1. Your system can not resolve the exchange server name.

2. Your system can notreach the exchnage server itself via IP.

3. RPC communication is being blocked at a firewall.

Check the following. Open a command prompt
(start/run/ type cmd (2k) command (98/xp).

Press enter.

type (without quotes) "ping mailservername" Do not use a FQDN. Use the netbios name.

Does it resolve and what does it resolve too. If it does not resolve, did you turn off netbios resolution on your network adapter?

If it resolves, but incorrectly, do you have entries in your lmhosts file.
(type nbtstat -c ,press enter and look for the names)

The next place would be your hosts file, this is in c:\windows or c:\winnt\system32\drivers\etc
Open it in notepad, uncheck use this program always. Look to see if you have any static entries.

Once you can ping the exchnage server by netbios name, assuming you are on the same subnet as it. Or by host name if your on different subnets. Try the name resolution again in the outlook exchange properties.

If that does not work... Then look at any personal firewalls. You need tcp 138 and 139, in and out, open in order to connect to exchnage.

by shanghai sam

I'm not using any firewall programs. I did turn on the WinXP firewall once but turned it off the same day. When I ping the server it resolves correctly. I do have an entry for the exchange server on my hosts file, but it resolves even if I removeit.

by jayanth

Hi,
I just came across your post and to be honest, I didn't have the patience to go through all the 55 answers so far.

How is your Outlook Configured? Are you using the 'Corporate Workgroup Option'. Also are you using PST for your mail storagein Outlook. Sometimes what may happen is that the Outlook profile may get corrupted on the local machine.
Before doing anything, backup all your mails. Store them as a single PST file if you wish to.

Now Right Click the Outlook icon on the Desktop and select Properties. If theres no icon, then goto 'Control Panel --> Mail'. Click on Show Profiles and you should be seeing the Profile created for you. **Remove** that Profile and recreate a new one giving all the necessary parameters. Now try accessing your mailbox. Hope this one helps.

Please forgive me, if I have repeated this solution, as I didnt go through all the answers given so far.

by shanghai sam

I am using the Corporate/Workgroup option. All of my mail is stored on a mailbox.pst file. I've tried recreating the profile several times but it doesn't help.

by wlbowers

Here is a couple of things you can try. Create a
host file in the windows directory. The hosts
file helps windows when it gets stupid.
There should be a hosts.sam (this is a
sample file with some explination). Use
notepad to create the file. Enter a line such as
this:
10.0.0.2 server

Use the tcp/ip address of the server and the
servers name.
Even though you set this information in wins,
according to MS, the os can still say duh, and
refuse to talk to exchange untillit is in the
hosts file.

Number 2
Go into regedit and navigate to the following:
Hkey_Local_Machine\software\Microsoft\Prote
cted Storage Systems Provider
There should be a profile key with your name
on it. Delete it.
You will know needto go to the control panel
and enter mail. Delete your mail profile and
reenter them. And try it.
I had a lot of problems with a clients network
when he upgraded for the 2k blow out. This
became a standard procedure untill I got
everyone stable.

Good Luck Lee

by shanghai sam

The only hosts file I found was in the windows\system32\drivers\etc folder. I don't know if this is the one you meant but I already have an entry in there for the exchange server. The results are the same whether its in their or not so I just leftit there.

I wanted to try recreating the profile after deleting the registry key you mentioned but it wasn't there. I went to HKLM\Software\Microsoft but there was no "Protected Storage Systems Provider". Was it the right key? Well, I guess ifI was going to delete it anyway it just saved me the trouble!

by athanman

Hello, it is I again. I want to revisit the solution I offered in answers no 54 and 55 ... oh and I'm sorry for posting it twice. I got an error message the first time. So I tried again.
Based on my experience I am absolutely sure that when you bring up the Microsoft Exchange server dialog box if for any reason you fail to enter the correct Identity for the Microsoft Exchange Server you will get an error message saying:
"The name could not be resolved. The action could not be completed."
This might very well be your problem. Make sure you have the correct character in there. Make sure that you letter O's are really O's and not the number "0" (zero). The last four characters are usually numbers not letters. Play with it to see ....you have nothing to loose. Whatever happens have a good day!

by shanghai sam

I'm absolutely sure that what I typed in is correct. I have checked it with what helpdesk has on their website, what they told me over the phone and email, and the settings that appear on the campus computers. There are no O's to confuse with 0's or vice versa, so every other character is definitely either a letter or number (or period or dash).

by lordinfidel

Do you have Client for Microsoft networks installed?

If you do not then your system will never be able to respond on ports 138 and 139.

Client for MS networks needs to be installed.

RPC communincation is the key here. Did you confirm however with the IT dept that the IP address of the exchange server is the correct one.

Also, if your system is not part of the domain, I would strongly suggest setting your authentication to none.

In properties of outlook/exchange/Advanced/Logon Security/ choose none. This will force outlook to prompt for a username/password and domain when you try to connect.

In case you don't know who I am.... I am a exchange guru. There is very little that I don't know about exchange.

As far as the RPC util that you tried. It is a client/server app. There are 2 parts to it. Unless the server side of the app was running, what you received was a false positive.

The IT dept would need to have the server side portion in order to verify rpc connectivity. But that will only say that there is nothing blocking connectivity. It will not mean anything though if Client for MS networks is not installed. You will still have the same issue.

Client for MS networks is bound to your network adapter. If it is not there, install it.

by estvb

Yeah, the Client for Microsoft Networks is installed and the IP is correct. Thanks for the clarification on the message I got from the RPC client program. I didn't know what it meant, but I guess since the server side once wasn't running then it didn't matter. The Logon Security is set to none. That's what it's supposed to be on for our personal computers on campus.

by lordinfidel

Our next step is to see what it is trying to do.

1. Open a command prompt. (start/run/cmd)

2. type the following:
netstat -a 5 > c:\netstat.txt

3. press enter, you will not see anything, it will appear to hang, that's ok. It's writingthe results to a file. Leave the command prompt open.

4. Now go and try to resolve the name in outlook.

5. Once it times out, wait about 10 seconds. Then go back to your command prompt and press
ctrl-c. This will stop it.

6. Now go toyour c drive and look in there for netstat.txt.

7. You can try posting them here, but it will probably be too much. Or you can send them to me directly.

What did we just do? netstat -a will show us all of the connections your system has in real time.

The 5 says to run every 5 seconds, and the > c:\netstat.txt is just piping the results to a file instead of to the screen.

What I want to know is if the program is actually trying to create a socket.

Also check in the properties for client for MS networks, is it using windows locator service or dce cell?

Also in your services (XP should have services) make sure that RPC is started and set to automatic. And the RPC locator is set to manual.

What I am trying to do is narrow this down of where we need to look. If we don't see ANY connections to the remote server being initiated, then we have to look more closely at the app. If we see a connection being initiated then we have to look at the OS.

by lordinfidel

.... Just took the time to read thru all of the posts and checked out the time line.

Here is what I read into it, let me know if these points are wroing.

1. It used to work.

2. It used to work after you did a clean install.

3. It stoppedworking....when? This is the point i'm confused on. What changed to make it stop working. Did it stop working when you first enabled the firewall, and when you disabled the firewall it continued to not work?

a. if so, and someone else might know this better than I, is there a way in add/remove programs/windows components to totally remove the personal firewall in XP. (I hate xp with a passion because it serves no valid purpose on corporate networks)

4. Have you done a fresh reinstall of the OS?
a- Points to earlier question.

"A fresh install means just that. It does not mean to install the os over the current system. It entails starting from scratch, formatting the drive and installing. This 'requires' that you make sure that all of your data is backed up and that you have install disks for any programs that you have. Preparing your drive for reinstall is somewhat of an art form, you need to know where to look to get all of your data, ie local e-mail."
5. I'm just curious, someone mentioned wins. From what I can tell, wins should not be a part of this equation. If at the command prompt you type in ipconfig /all , it will tell you all of your settings for your adapters.

a. What did you manually set in your tcp/ip properties?

6. NetBios over tcp/ip, must also be enabled. Set it back. Also netbt service helper for tcp/ip must also be started.

by shanghai sam

Ok, here we go. As far as your comment goes you have the timeline correct. The problem started a couple of weeks into February. I hadn't done anything recently that I can relate to causing the problem. I did the enabling/disabling of the firewall long before the problem started, I was just curios and turned it on, then turned it off the same day. I did a fresh intall of WinXP in December and haven't done any sort of reinstall or clean install since. I checked the wins in the TCP/IP properties and it didn't have anything listed under it. When I typed ipconfig /all in the command prompt it said "WINS proxy enabled: no". Farther down it had a listing for the primary and secondary wins servers and both had the same ip listed. I haven't changed anything in the TCP/IP properties except when someone suggested something, but then I changed it back to the default. The NetBIOS setting was set to Default but I changed it to enabled.

I checked the services and the RPC and RPC locatorwere started/automatic and manual respectively. I guess the "netbt service helper for tcp/ip" is "TCP/IP NetBIOS Helper", it was started and set to automatic. The Client for Microsoft Networks is using the Windows Locator.

I also tried the netstat suggestion and emailed you the file. I also posted a comment with a summarized version of the file for anyone else that wants to see it. Thanks for the troubleshooting help.

by estvb

Well it's letting me post a second comment to your answer so I'm using my chance. I was going to email you the file except that I don't know your email. If you want it just email me and I'll send it, otherwise I posted a summarized version with a comment above.

by estvb

(see answer 61) The only changes I made were removing some repetition and removing some spacing so that I could fit everything into one comment. There were six repetitions of the first set and two of the second. After starting recording netstat I went to outlook and tried the Check Name first with ?minermail.umr.edu? as the exchange server and then with ?umr-mail5?.

Active Connections
Proto Local Address Foreign Address State
TCP ea:epmap ea:0 LISTENING
TCP ea:microsoft-ds ea:0 LISTENING
TCP ea:1025 ea:0 LISTENING
TCP ea:1027 ea:0 LISTENING
TCP ea:5000 ea:0 LISTENING
TCP ea:1035 ea:0 LISTENING
TCP ea:netbios-ssn ea:0 LISTENING
UDP ea:microsoft-ds *:*
UDP ea:isakmp *:*
UDP ea:ntp *:*
UDP ea:1045 *:*
UDP ea:1900 *:*
UDP ea:ntp *:*
UDP ea:netbios-ns *:*
UDP ea:netbios-dgm *:*
UDP ea:1900 *:*

Active Connections
Proto Local Address Foreign Address State
TCP ea:epmap ea:0 LISTENING
TCP ea:microsoft-ds ea:0 LISTENING
TCP ea:1025 ea:0 LISTENING
TCP ea:1027 ea:0 LISTENING
TCP ea:5000 ea:0 LISTENING
TCP ea:1035 ea:0 LISTENING
TCP ea:netbios-ssn ea:0 LISTENING
TCP ea:1223 umr-mail5.umr.edu:microsoft-ds TIME_WAIT
TCP ea:1226 umr-mail5.umr.edu:microsoft-ds TIME_WAIT
TCP ea:1228 umr-mail5.umr.edu:microsoft-ds TIME_WAIT
UDP ea:microsoft-ds *:*
UDP ea:isakmp *:*
UDP ea:ntp *:*
UDP ea:1045 *:*
UDP ea:1900 *:*
UDP ea:ntp *:*
UDP ea:netbios-ns *:*
UDP ea:netbios-dgm *:*
UDP ea:1900 *:*

by lordinfidel

Ask your IT dept if your network uses employs wins servers or if it just uses dns.

I say this because you said that wins was enabled to no, but you had ip's in the primary & secondary wins servers.

Also.... Do you know if you have a static IP or if you get your settings via dhcp?

If it's dhcp and there is no wins, in your network adapter properties (tcp/ip properties), there should be absolutely no entries in there. No static dns server entries, no static gateways, no extra IP's, no wins server address'.

If it is supposed to be pure dhcp, then to be on the safe side, open a command prompt (your starting to like the command prompt aren't you, I live for the command line) type in ipconfig /release_all (this releases all dhcp leases bound to any dhcp enabled adapters)

Normally I would just say renew, but in this case reboot. When it comes back up open the command prompt and check the config again (ipconfig /all).

My purpose for saying the above, I want to get your adapter into a very basic default state. There have been a lot of creative answers, but connecting to exchange is not brain surgery. It is generally straight forward. So straight forward that you can walk up to anty machine on the network and connect just by changing the exchange mailbox properties. Regardless of who your logged in as.

by lordinfidel

Just so the general public can follow along with our off-line conversation.

His results of netstat shows that he was trying to go to the fqdn of the mail server. This associated into a time-wait state and then gave the could not resolve name.When he enters in just the netbios name of the server, he does get the u/d/p box. Which is what we want. I've instructed him to continue to use only the netbios name.

The next step is to have him try to resolve one of his friends accounts usinghis friends account information.

If he can open his friends mailbox, then he will go into the tools/services/advanced and add his name to the mailbox and see if it resolves.

If it does, then he can contact tech support and have them add his friends name into the permissions of his mailbox as owner. Once in, he then needs to export his mail into a pst.

The reverse all of the changes, and put his name in as the primary. If that still does not work, then Before having tech support blow away your mailbox, go and get rid off ALL of your profiles. But don't do it from the outlook icon.

Go into your control panel and look for the mail icon. Get rid of your profiles from there.

Then go back to your outlook icon and see if there are any profiles there. If there are, get rid of them.

Then close out. Reboot. then check to see if your profiles are still there (in both locations)

If they are not, then in outlook icon, add the profile again, add exchange and configure it.

If that still does not work, get rid of the profiles again. Remove Outlook totally. Reboot, reinstall outlook and try it again.

If that still fails, then it's time for tech support to blow away the mailbox and recreate it.

by estvb

Sorry I took so long to try out your suggestion and reply, but I've been really busy this last week of the semester and in studying for finals (8am monday and tuesday...ugh!) Anyway I found a friend that had his account on umr-mail5 like me and asked him to put his info on the u/d/p box. By the way I told you wrong, minermail doesn't work whether it has umr.edu at the end or not. Anyway my friend got the same error message I've been getting. As I said in my last comment the helpdesk closed my question and told me to reinstall WinXP. I'll probably do that some time in the summer. Thanks for your help so far, I'm leaving the question open for now but I'm not sure if I'll get a chance to try out too many other things since I'm done with finals on tuesday and I'll be going home for the summer.

by estvb

Well my campus helpdesk seems to have exhausted all of their troubleshooting options and closed my question. They told me to reinstall and possibly seek outside help.

Luckily I've already done that (the outside help anyway) and posted my question here. Thanks for all the help!

This discussion is closed to new replies.