Question Locked

changing OS serial number for activation after OS reinstall

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I reinstalled XP Pro on a PowerSpec machine at work from a Dell reinstall CD, and I want to activate the license with one of our volume XP licenses. I tried activation once and it didn't work. What do I need to do? Thanks for help.

12 replies

by mtnrunner

thanks erik, but this didn't work, i'm going to check the other comments, but i didn't see anthing that looked quick ;-)

by dumphrey

a volume license cd instead of an oem install cd. But the XP prod key changer may work. Would be quicker then another re-install.

by mtnrunner

thanks, I banged my head on it, I downloaded the .iso from M$ that I should have used originally when using the volume license

thanks again

by ic-it

The Key changer will not overide the need for the same type of licensing i.e. You may change an OEM to another OEM key.
You could use use your Volume License media to repair the install, this will allow key entry.

by mtnrunner

it would certainly be less trouble; i'll let you know how this goes

by oh smeg

I don't think that the Dell one does either so what is the need to activate?

You can try using Keyfinder from Magic Jellybean to alter the Key and not the M$ one as Keyfinder works better and faster.

http://tinyurl.com/b01p

Though depending on your Security Settings you may need to open this in anything but IE.

I'm not sure if you can use a Volume License Product Key on a OEM copy of XP I've never tried this but I would imagine that it will not work as the Volume License copy is different to the OEM Copy.

Col

by mtnrunner

Windows 2000 - i had started with the keyfinder before i reinstalled, then i did the reinstall on the powerspec with the dell cd, after i had everything going and seemed to be working i still was required to activate the OS with the serial number (one of our volume license serial numbers) and this is where things went awry, I'm going to try the volume license media track above and i'll post the results

thanks for your suggestion though

g'day! ;-)

by oh smeg

If you use the Volume License Copy to perform the In Place Install

http://tinyurl.com/g4bv8

As Volume License doesn't need activating all you'll need to do here is to run the In Place Install and enter the Volume License Key and the unit will work properly. If you don't do a Complete New Install you'll not even need to change any drivers as the existing ones will work.

The only possible problem that you may face is if the Volume License is older than the OEM Copy you'll have to apply the Service Packs again but even that isn't an issue. But no matter what happens you'll need to patch the system after the Volume License Copy is used. If you have done this with the Dell OS that will have been a wasted effort so it may take a bit longer to finish off the Complete Install but if you have already got your Software Loaded doing a In Place Install will be much faster as you'll not need to reinstall any of the Software again.

Col

by mtnrunner

I'm excited about giving this a shot, I'll let you know!

This discussion is closed to new replies.